Battery Box

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tamcameron

tamcameron

Member
Posts
72
Hey all,

My battery box is filthy with 20 years of dirty etc no rust.. not many holes

my plans are to give it a good clean out and place a dual battery system in the box..

there is no battery tray etc..

can you recommend what you guys have done to your battery box that i should do to mine...

thanks all
 
Well i just cleaned out the crap from mine.
Blocked up all the holes with neat grommets and stuck the battery in the bottom towards the front no clamps as its held in place with all the gear/tools in there.
I suppose i should sort out some clamps maybe!
I was thinking of lining it with the camping bed foam.
Try a search for batteries on here as thats how i got my current 1000amp unit.


Lynall


Lynall
 
put camping bedroll foam in mine in middle of winter last year and my battery turned the 90 over much easier when it got to minus 10 and lower compared to the day before.
 
Same with mine, I had to weld mine up so cut out the bottom and fabricated a whole new panel to go in, then the inside got a coat of white Hammerite for added bling. Got a cheap rubber floor mat from Tesco and stuck it in the bottom, some M8 bar and a home made clamp keeps it locked down tight.
 
You must log in or register to reply here.

Similar threads

Dayo97
Battery box paint
Replies
5
Views
467
dag019
dag019
Cyrus 200
Battery Drain
Replies
6
Views
336
Cyrus 200
Cyrus 200
H
Defender battery - what I fitted
Replies
8
Views
883
johnlad
johnlad
RustyDefender
2nd battery locations in a 90
Replies
12
Views
2K
RustyDefender
RustyDefender
M
Freelander 1 - House hold battery connection
Replies
4
Views
644
MarcDelonghi91
M
Back
Top