Bankz's Discovery 2!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Started on my new airbox today.

3.5" inlet and 4" outlet to turbo. Laser cut and CNC bent 2mm mild steel.

Went with tabs and slots to make it easy to line up. It does have a lid which will have some 3mm polycarbonate, makes it easy to check on the filter! Obviously with some rubber seals to keep it water tight.

20220712_070851.jpg
20220712_071032.jpg
 
Got a couple days off from work. Soooo wide arches! They are the priority as tyres booked for fitting on Fri morn.

Aiming to get the aux fuse box in, headlight guards and gauge pod in but knows.

Was also pleasantly surprised to find D2 AC condensers are only £160! Nof £600 like a Def! Mines seen better days for sure, so thats on the list.
 
Finally done! Took a while. Ended up sorting a few rusty patches and realised I need both front inner wings...

20220714_185539.jpg
20220714_185551.jpg
20220714_185600.jpg


Booked in for the 33s" tomorrow morning :D

Also got rid of the gutless Alive map and loaded a bespoke Empire tune, along with a new map sensor and some more boooost. Goes much better now :D
 
Installed my second stealth light bar, its almost as if these Osram bars are made for D2s!
20220715_160632.jpg


Not bad flex either considering still got both ARBs

20220715_160144.jpg
20220715_160431.jpg


Passenger tyre rubs slightly on the radius arm so have bought some 30mm hubcentric spacers. Should solve that.
 
You can get a fair amount of flex on a Disco with ARBs still in place. This has standard wheels and tyres and a 2" lift so nothing extreme. Both back wheels still on the ground.


flexing.jpg
 
New tyres are decent so far. Much less road noise than Coopers, rides well too.

Cant stand the straight through exhaust though, sounds awful, boomy and loud. So bought a free flow resonator which Ill weld in to the straight pipe. Should sound a lot better and less boomy
 
bankz5152 said:
Been meaning to do this for weeks. Big of trial and error to get it right but didnt take long.

Bonnet gas struts-



We all know how often the bonnets up on a Landy, makes life easier :rolleyes:
Click to expand...


I cant believe I just got scammed into wasting 9seconds of my life watching you open and close a bonnet:rolleyes::rolleyes:.

J
 
marjon said:
I cant believe I just got scammed into wasting 9seconds of my life watching you open and close a bonnet:rolleyes::rolleyes:.

J
Click to expand...

Standard :p:p:p

Bone9 said:
What ones did you buy mate?
Click to expand...

I bought struts, laser cut some brackets from 3mm stainless. Though you can get mounts off amazon and ebay.

200n 400mm long. However I expect that 250 or 300n and 450mm struts may work better.

Its a nice soft, assisted open at the minute. Bit more pressure it would be hands free.
 
Want to do this to mine. Don't suppose you could post more detailed pictures such as where you located the brackets on the inner wings? And what struts did you use?
 
You must log in or register to reply here.

Similar threads

S
Defender 90 TD5 Low miles
Replies
17
Views
2K
steveyorks
S
P
Back with a freelander 2
Replies
0
Views
571
Pitkin2020
P
bankz5152
SOLD
Replies
2
Views
2K
bankz5152
bankz5152
Lej
Discovery 2 Clutch failure
Replies
2
Views
630
Lej
Lej
new to all this
Discovery 2 1999 ES for sale East Sussex
Replies
17
Views
2K
new to all this
new to all this
Back
Top