200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Talking about the ones in pickup 4x4 's that started life in the 300-350hp range and are daily drivers
Skylines are 300hp standard daily drivers
Where's your point ?
Talking about the ones in pickup 4x4 's that started life in the 300-350hp range and are daily drivers
Nope. power harrow drill combination, but you can drill grass seed directly into stubble with it
Just a flail topper on the front as it saved a load going to the show.
' and they can pass anything but a petrol station (that's petrol not gas, gas is a gas, petrol is a liquid)Don't yank vehicles refuse to go round corners though?? :-D
' and they can pass anything but a petrol station (that's petrol not gas, gas is a gas, petrol is a liquid)
Just about anything can be gas, or liquid, or even solid given the right temperature and pressure.
Water becomes gaseous at 71 degrees @ 8.5K ft.
Baked beans become gas at stomach pressure
I have miss laid my chart and diagram ,so you will have to just believe me
Just about anything can be gas, or liquid, or even solid given the right temperature and pressure.
Water becomes gaseous at 71 degrees @ 8.5K ft.
My mate came in with his skyline today and we've been looking at the swirl pot on it how to modify it to stop it leaking out the top, come up with a plan then he took me out for a quick blast
120MPH in 1/4 mile ...
#### me it's fast
Only 120 in a 1/4? With 700bhp? My Sierra runs at 100mph on the 1/4 with 297bhp on an old airstrip with dodgy concrete surface covered in moss and cow ****e!
was that with a single bottom plow ?
You mean conventional. ? No it was a reversable 5 furrow
a 5 bottom roll over plow like these..https://www.google.com/search?q=pic...gG2roGIAQ&ved=0CDYQsAQ&biw=1066&bih=532&dpr=1
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!