Aux Switch Location?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tweedandbriar

tweedandbriar

Active Member
Posts
258
Location
Somerset
Hi,

I've a light bar fitted, just wondering where you have located your Aux switches? I am trying to keep my 1999 as stock looking as possible so not looking to put anything drastic in there, just an easily accessible switch thats not too much in ya face.

Thanks, pics if possible?
 
Do you have a spare space in the panel by your right knee? Some have 3 spaces but only use 2.
Pics of yours would help suggestions ;)

J
 
Search for rdx side pods
Mine looks like this screws into existing holes

1731505950964.png
 
marjon said:
That's a tidy solution. I need to remember it now for when I sort ours:vb-groan2:.

J
Click to expand...
Bolt on bits has plenty of ideas & switches. Can be a pain to search the site for ideas but I buy loads when I shop from them.
Best bit about them pods your right by the dash so easy to hide electrics/relays etc
 
Hicap phill said:
Bolt on bits has plenty of ideas & switches. Can be a pain to search the site for ideas but I buy loads when I shop from them.
Best bit about them pods your right by the dash so easy to hide electrics/relays etc
Click to expand...

I just had a quick look and the first thing that hit me was BOB :vb-rofl:.
Now back to looking:).

J
 
tweedandbriar said:
All three used, Demister, Hazards and Fog Light
Click to expand...
Move the dog light to the steering column like the older ones have using the headlight atyle
Switch and you would then have a spare space.

But there should be at least one might even be two spaces on the underside of the dash binicle that you could use. Which might be what @Anaconda was referring to.
 
dag019 said:
Move the dog light to the steering column like the older ones have using the headlight atyle
Switch and you would then have a spare space.

But there should be at least one might even be two spaces on the underside of the dash binicle that you could use. Which might be what @Anaconda was referring to.
Click to expand...
Yes your right, I just hadn't remembered the location correctly.
 
I have a neat replacement center panel from MUD UK, has an uprated power socket, Switch for interior light independent of the dash/interior light switch that passenger can use as well, Rear work light, the usual rear wipe/wash and a spare blank.
 
Anaconda said:
Yes your right, I just hadn't remembered the location correctly.
Click to expand...
1731587474804.png

It is in part 6 on the part diagram above, and will have a plastic blanking plate filling the hole. the hole is sized for a switch the same as in the three switch panel by your knee. Looking at the pic below it is just a single switch position, but mean no modifications required for a single additional switch.

1731587550476.png
 
You must log in or register to reply here.

Similar threads

StuRox
Disco 1 Interior Light door switch wiring
Replies
8
Views
346
StuRox
StuRox
RobV8Defender
Range Rover Classic 1990 Upper Tailgate Light Switch
Replies
5
Views
830
norseman
norseman
Mack1
New to landy zone
Replies
6
Views
724
brianp38dse
brianp38dse
S
Trouble with ignition switch wiring
Replies
11
Views
1K
tottot
tottot
dag019
Fitting a Husky Winch
Replies
8
Views
617
dag019
dag019
Back
Top