RS2000CUSTOM
Active Member
- Posts
- 346
- Location
- The Black Country - The Miglunds
Having invested a thick wedge in my new toy (88k mile 53 plate TD6 L322) and due to me planning on keeping the car (as I did my Soft dash) for apprx 5 years I have decided the following
I will be very shortly having a new torque convertor fitted
I have no current issues with the gearbox or gearchange but at 88k it wont be long before "issues arise"
Whilst reading previous threads and the excellent gearbox strip article linked to by others it appears to me the weak link is the plates within the convertor
My theory is that the oil pump draws in the oil through the filter and then into the TC which then pressurises the oil within the gearbox and valve system and oil cooler so should or more importantly WHEN the TC fails it dumps its swarf under pressure into the workings of the gearbox and as the box is not longer protected by the filter (after the TC) major failure is guaranteed.
So my plan is to have fitted a new TC, filter, cooler and a full strip, clean, inspect and rebuild of the gearbox - fill up with correct spec Texaco Texamatic 7045E oil BEFORE anything fails !!!
Have contacted VMTP in Cannock regarding the work to be carried out as a drive in - drive out service with them reporting back to me once box is stripped.
I run my own small MOT Service and repair business and VMTP have on previous occasions been no problem whatsoever to deal with and I have had no issues with work carried out by them for me.
Thoughts please !
Sorry meant to add that I will be regularly towing my track car all over the country and want to reduce where possible any risk of failure when out on the road.
I will be very shortly having a new torque convertor fitted
I have no current issues with the gearbox or gearchange but at 88k it wont be long before "issues arise"
Whilst reading previous threads and the excellent gearbox strip article linked to by others it appears to me the weak link is the plates within the convertor
My theory is that the oil pump draws in the oil through the filter and then into the TC which then pressurises the oil within the gearbox and valve system and oil cooler so should or more importantly WHEN the TC fails it dumps its swarf under pressure into the workings of the gearbox and as the box is not longer protected by the filter (after the TC) major failure is guaranteed.
So my plan is to have fitted a new TC, filter, cooler and a full strip, clean, inspect and rebuild of the gearbox - fill up with correct spec Texaco Texamatic 7045E oil BEFORE anything fails !!!
Have contacted VMTP in Cannock regarding the work to be carried out as a drive in - drive out service with them reporting back to me once box is stripped.
I run my own small MOT Service and repair business and VMTP have on previous occasions been no problem whatsoever to deal with and I have had no issues with work carried out by them for me.
Thoughts please !
Sorry meant to add that I will be regularly towing my track car all over the country and want to reduce where possible any risk of failure when out on the road.
Last edited: