auf_wiedersehen_pet's build thread.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The only place you'll see my arse floating is in the sea or in the pool on holiday!

1013galif.jpg

So that's where my fecking Swim suit went!!!!!!,bloody Disco owners!!!:D
 
If you don't mind me asking?? Ho did you crate your own graphics as that looks superb! Are they individual letters or printed in is enrirety?
 
If you don't mind me asking?? Ho did you crate your own graphics as that looks superb! Are they individual letters or printed in is enrirety?

That's one of the perks of being Head of Technology in a secondary school. Used our Roland CX 24 and a 3m roll of 7 year Avery vinyl from eblag.

b_roland_cx24.jpg

This isn't ours but ours is identical.

Pinched the logo from Google. Used Techsoft 2D Design Tools - contoured at 1mm to make the image slightly thicker, cut, removed waste and applied application tape. Simples!
 
Here goes the first side.....

Trial hanging.
IMG_6151_zpsb6d373df.jpg


Lining up the gaps. The inner vertical edge of the M is precut so that I could have a straight edge if needed.
IMG_6153_zps019bccfe.jpg


IMG_6154_zpsd37a8150.jpg


Start point and height.
IMG_6155_zps15c214e8.jpg


IMG_6156_zps9a8651fe.jpg


Position fore and aft of the indicator.
IMG_6157_zpsfb73bf2a.jpg


Inside door.
IMG_6159_zps9b54ce1b.jpg


End result.
IMG_6158_zps5eadd894.jpg


IMG_6160_zps8a0018f1.jpg
 
Back
Top