Anyone with a Disco and towbar

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Didnt go to Witters.

I took your advice on board, and sat and thought. I then made an executive decision to ignore your advice totally, and go to Witters.

I forgot.
 
There is 3690 members of this collective forum(s).

So taking percentages into account, that means....erm....a LOT have Discoveries.

I do not believe for one second EVERYONE with a Disco has an original towbar.
Arse.
 
I Thinks Your Going Have To Do Abit Of Welding Lenny Old Chap I Have Been To Beam Ends To Pick Up Some Bits Today And Ask Them About The Towbar The One You Have Is The Only One They Have Seen
 
The bit it bolts onto is called the rear cross member - I'd just replace that as its structural and will be a mot fail if its rotten. Horrid job as it involves welding the boot floor pan back on. It will also be spot welded to mount the rear quarter panels on. These can either be rewelded or be bolted [use high tensile 10mm set screws].
 
aye its true. i towed a trailer the other day with about 5 tons of bricks on it.
nowt fell off the disco.

the trailer is a funny banana shape now though.
 
Richyborofanrich said:
My towbar is exactly like yours lenny








apart from mine is still on nice and tight ;)
Click to expand...

I shall have you know, much to the annoyance of **** taking banter, my towbar is not only tight, but is also completely re-bolted in all directions.

You wouldnt believe the story of today, just in the bath and i shall post what happened.

Some people will steal anything...................................
 
Lenny1969 said:
I shall have you know, much to the annoyance of **** taking banter, my towbar is not only tight, but is also completely re-bolted in all directions.

You wouldnt believe the story of today, just in the bath and i shall post what happened.

Some people will steal anything...................................
Click to expand...
WHAT your in the bath now isn't that tricky typing while in there :D
 
You must log in or register to reply here.

Similar threads

S
pulling loom through chassis
Replies
5
Views
903
sprie
S
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
kevstar
Anyone near Aberdare with a large van or trailer..
Replies
1
Views
361
V8bob
V
KernsArt55
DISCO 2 No Communication with SRS
Replies
12
Views
968
sierrafery
sierrafery
NZ Pablo
TD5 runs similar with and without MAF
Replies
6
Views
1K
sierrafery
sierrafery
Back
Top