sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
the compressor is new.
Another p38 EAS fault.
- Thread starter sjp873
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,634
- Location
- Sud ouest France !
That's one thing you can rule out
sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
unfortunately i have zero to no patience for this sort of thing.. im going to need it!
- Posts
- 12,634
- Location
- Sud ouest France !
Unfortunately, it's cheap and impatience is Flipping costly....
sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Unless its been feeding a leak ,it may need resealing.
- Posts
- 12,634
- Location
- Sud ouest France !
Yip, that's a good comprehensive kit. It takes a while and patience to get it done correctly. One solenoid at a time and carefully does it.
@kurtjohnson10 does new NRV valves also.
- Posts
- 12,634
- Location
- Sud ouest France !
What our Alan said!!
Go through the list of checks before you spend any money first!!!
kurtjohnson10
Well-Known Member
- Posts
- 15,235
- Location
- midlands
Its a good kit, if you do it right, though if the solenoid bases are hardened then new o-rings will not make any real differenceYip, that's a good comprehensive kit. It takes a while and patience to get it done correctly. One senoid at a time and carefully does it.
@kurtjohnson10 does new NRV valves also.
sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
for £12 I've ordered it, its got to be worth a bash!
- Posts
- 12,634
- Location
- Sud ouest France !
Just taken your time and be PATIENT
sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
do i need to remove the whole block to replace this part?
Tenebreaux
Well-Known Member
- Posts
- 4,304
- Location
- Armagh
It's only three bolts and pop the lines out.
sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
fair enough
- Posts
- 2,101
- Location
- Mull of Kintyre
Rebuild the entire block.
If one valve is tired, the others wont be far behind.
I personally would go for Kurt to rebuild it cos then that is it ruled out
Then if still faulty then suspect leaking air line
Would be worth doing the checks you have been advised many times
If one valve is tired, the others wont be far behind.
I personally would go for Kurt to rebuild it cos then that is it ruled out
Then if still faulty then suspect leaking air line
Would be worth doing the checks you have been advised many times
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Bollox.
Pumps fail with time but usually after feeding a leak. Valve blocks do get issues but rare compared to bags or airlines melted by exhaust blow. Driver packs have been known to fail but usually the pins on the connector, the connector behind the passenger kick panel or a height sensor with a dirty track, especially if the wheels have been hanging.
Process of elimination now.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
+1,if your not confident PM @kurtjohnson10 for a price.
- Posts
- 2,101
- Location
- Mull of Kintyre
And yes a small leak will let air bags down but it would take a major leak to stop it going up in the first place.
My guess is either a knackered pump or a blown exhaust melted the main line to the tank
My guess is either a knackered pump or a blown exhaust melted the main line to the tank
sjp873
Active Member
- Posts
- 92
- Location
- Plymouth, Devon
Yes, so going to buy a working complete unit from fleabay,(with 30 day warranty) and then have mine rebuilt (retired engineer father is looking forward to doing this after he watched youtube videos) using rebuild kit. I'm going to reinstall my original after its done. I will keep other as spare and look to refurb at a future date.
will also be buying another pump, and advised to either replace or refurb air dryer.
Will keep you all updated.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Valve block? PM Kurt and see what he has at what price. He had a spare driver pack last I heard too.
Similar threads
