alternative oil cooler for 4.0 p38

sticks · Sep 15, 2008

is there an equivilent cooler for a 4.0 p38 i can buy and install as the rr one seems to be infamous tryed everywhere for it ,model no esr 3204 need one asap!!!
new or s/hand as long as it dont leak!!!
cheers

zzr1200 · Sep 15, 2008

sticks said:
is there an equivilent cooler for a 4.0 p38 i can buy and install as the rr one seems to be infamous tryed everywhere for it ,model no esr 3204 need one asap!!!
new or s/hand as long as it dont leak!!!
cheers

Is this of any help, 4 in stock:

RANGE ROVER P38 4.0 ENGINE OIL COOLER on eBay, also, Range Rover, Car Parts, Cars, Parts Vehicles (end time 14-Oct-08 17:28:49 BST)

sticks · Sep 15, 2008

cheers zzr i forgot to say im in north london so can travel upto 70miles approx,

thanks tho did see that one on the bay but miles away

zzr1200 · Sep 15, 2008

sticks said:
cheers zzr i forgot to say im in north london so can travel upto 70miles approx,

thanks tho did see that one on the bay but miles away

Courier tomorrow am delivery???

Or have you tried:

Foley Specialist Vehicles

zzr1200 · Sep 15, 2008

Sticks, you haven't asked if anyones coming to the smoke this afternoon have you:

LandyZone Courier Service

sticks · Sep 15, 2008

thanks again zzr ,i got desperate and rang that guy with the ebay ad and guess what not in stock ,a bit cheeky to list 4 available !!
rang foleys and he gonna ring me back if he can get for tomorrow ,so fingers crossed,

thanks again m8y

zzr1200 · Sep 16, 2008

Any luck locating an oil cooler???

sticks · Sep 16, 2008

hi ,im waiting for foleys to ring me and tell me its been delivered this morn,cant wait as this stupid part has been a nightmare to locate!!!
fingers crossed i should be back on the road by mid day ,

thanks for that info m8y,

sticks · Sep 16, 2008

got the cooler HOOORAYYY!!!!,all fitted apart from the righthand side pipe the one with the bigger nut,unfortunatly it was shredded up bad so now need one of theese!!!!anyone got a part no please,

thanks

Irishrover · Sep 16, 2008

Look at my reply to your other post regarding cost. Hose part nos. are listed but you will have to check which is which. I cut the steel part of the pipe on mine, slid the nut off and ran an M22 fine thread tap down the nut to clear the crap out of the threads then used a 1/2" compression straight fitting to join back up-the fitting was rated at 200p.s.i., more than adequate. Don't forget what I said about the port on the front cover not having much meat around it-will break if you are too heavy handed when tightening

sticks · Sep 17, 2008

all fitted all sorted back on the road again!!!!

thanks for all your help lads

alternative oil cooler for 4.0 p38

sticks

New Member

zzr1200

Well-Known Member

sticks

New Member

zzr1200

Well-Known Member

zzr1200

Well-Known Member

sticks

New Member

zzr1200

Well-Known Member

sticks

New Member

sticks

New Member

Irishrover

Well-Known Member

sticks

New Member

Similar threads