- Posts
- 4,665
- Location
- Rotherham
Top of Range Rover forum page just below where it says Range Rover, Technical section with number of posts written underneath. Just click on iti may sound really dumb here.
i cant find this tech forum? sorry.
airpump
- Thread starter tyke100
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 4,665
- Location
- Rotherham
Sorry says Technical Archive
Thank you. knowledge is a good tool. lol. found it finally.
i did connect the compressor Manuel and is working.
it also blows the bags up. but taking the power of the compressor it looses the air again .still have this 35 mph max in the display. grrrhhh.
this relay in the fusebox - can it be any relay as there was none in the slot.
i put a normal 4 pin in/ but seems not to do anything. no clicking - nothing.
but it is working when i tested it.
fuse is fine.
or is this all related to the faultcode?
when i bought it and had to use the tyre compressor for a while to get the suspension on hight there was no fault coeds and it did drive. this all started when i put the replacement compressor in.
i also noticed the alarm illumination is flashing on overtime now/ or are the flashing fast com[pare to newer cars?
i did connect the compressor Manuel and is working.
it also blows the bags up. but taking the power of the compressor it looses the air again .still have this 35 mph max in the display. grrrhhh.
this relay in the fusebox - can it be any relay as there was none in the slot.
i put a normal 4 pin in/ but seems not to do anything. no clicking - nothing.
but it is working when i tested it.
fuse is fine.
or is this all related to the faultcode?
when i bought it and had to use the tyre compressor for a while to get the suspension on hight there was no fault coeds and it did drive. this all started when i put the replacement compressor in.
i also noticed the alarm illumination is flashing on overtime now/ or are the flashing fast com[pare to newer cars?
- Posts
- 4,665
- Location
- Rotherham
If you have a hard fault it needs clearing before relay can engage compressor
thanks. ok. so no point ordering anything for it and let it rust in the garden till i get this software and cable to reset. lol
i already lost interest. its raining and not running. lol.
best i try moving right in the far corner out the way till anything happen to it.
maybe my fault not to investigate properly before buying one.
like other make i dint even consider of too many problems.
so need to source this cable now.
i already lost interest. its raining and not running. lol.
best i try moving right in the far corner out the way till anything happen to it.
maybe my fault not to investigate properly before buying one.
like other make i dint even consider of too many problems.
so need to source this cable now.
Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
As I said, contact mozz smith.
A P38 with faults can be a nightmare as you are discovering. When sorted they can be reasonably good, but diagnostics seem to be essential.
- Posts
- 58,170
- Location
- Preston Lancs.
Sounds like you have more problems than you think you have, buggering about when you don't know what you are doing makes things worse. Do you not have a friend with more knowledge who can look at it for you.
yes one who say he has a look and never turns up when he says and the other is mechanic and trying his best. lol. but he has only access to the standard workshop diagnostic laptop.
we fixed everything else and done what needed doing.
even the blowers worked again. until the driver side developed the same fault again. so ordered a new unit to replace.
i just thought get the pump and replace the thing and done with.
got a 1996 there is too much electronics in it.
the key was my own fault by trying get a new housing which didnt work out easy but working now.
- Posts
- 58,170
- Location
- Preston Lancs.
You need dedicated diagnostics for the P38. Nothing else will touch them apart from some engine data on petrols.
- Posts
- 4,665
- Location
- Rotherham
On Landy Zone main home page which shows all the different forums there is one called International Rescue. This is where members who are willing to help each other. You could see if there is anyone nearby with diagnostics who would help out for beer, tea, coffee, cake, biscuits etc Worth a look
thanks. ill have a look. didnt know that.
i sourced a cable just waiting of payment details and then until it gets here. and hopefully i can download this software.
at least some progress. lol
- Posts
- 4,665
- Location
- Rotherham
Google RS solutions there are videos from the guy who designed the software. That way you will know how it works. Its a great piece of kit
- Posts
- 12,655
- Location
- Sud ouest France !
https://sourceforge.net/projects/easunlock/
@tyke100 you can get the free software here for the P38 eas.
@tyke100 you can get the free software here for the P38 eas.
brianp38dse
Well-Known Member
- Posts
- 20,093
- Location
- heathrow
Looking at the LZIR map there is ZZR1200 in chesterfield with the right diag kit he was last on here end of last year.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Make sure you read fully any posts people add to your thread, I told you in post #23 where to find the Technical Archive.
i tried. hence saying call me dumb. lol.Make sure you read fully any posts people add to your thread, I told you in post #23 where to find the Technical Archive.
i could not find it.
the other half did.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Her turn for the glasses?i tried. hence saying call me dumb. lol.
i could not find it.
the other half did.
