Air Suspension Issue - One air bag higher

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lewisc

lewisc

Member
Posts
32
Location
Leicestershire
After having to replace the starter motor today the drivers side front axle was jacked up. When coming to drive it it had EAS fault and was on the bump stops. Front air bags were replaced yesterday but EAS was OK driving last night (until starter motor went). Now I've checked plugged it into the laptop I read the codes on only got vehicle had moved. Reset and now front passenger air bag is way higher than the other three. Any ideas on what the issue could be?

Capture_zpsava5zavg.png
 
check the condition of the height sensors - my ones were all rusted up / perished and needed replacing to the newer plastic type
 
height sensors put back the correct way around ?
Mine threw a wobbly after it's MOT as it was put on a lift and the wheels left hanging down, they are precious little beasts.
 
The front air bags were replaced a couple of days ago but the EAS was fine last night, then the starter motor gave up so it was jacked up this morning to get to the starter. Then the EAS issues arose.

A few weeks ago the EAS played up, I think due to a slow leak in the front air bags.
 
I do agree, i just thought running a calibration would tell if the system has broken down somewhere.
I have found a few times that the thing has fixed itself after clearing the faults a few times and driving it if you can
 
You must log in or register to reply here.

Similar threads

K
Is my RR Classic in EAS shutdown?
Replies
12
Views
1K
kevleaper
K
MAF Diver
Disco 2 Passenger side 1cm higher than driver's, how to level?
Replies
6
Views
662
Stanleysteamer
Stanleysteamer
rover75lover
L322 l 322 air suspension
Replies
4
Views
890
rover75lover
rover75lover
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
S
L322 Air Suspension Conundrum
Replies
14
Views
2K
backinblack
backinblack
Back
Top