Air spring change South Wales

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Morning all,
Finally changed all the air springs - thanks for all the advice.

It was a bit tricky in places!!!

I've measured my ride heights for the first time-and one wheel is out by about 15mm-any issues or leave it for now?

Thanks

Steve
 
Morning all,
Finally changed all the air springs - thanks for all the advice.

It was a bit tricky in places!!!

I've measured my ride heights for the first time-and one wheel is out by about 15mm-any issues or leave it for now?

Thanks

Steve

Run it for a while until everything settles down and you're certain that you have no leaks or other issues. Then you can worry about precise height settings.
:D
 
Morning all,
Finally changed all the air springs - thanks for all the advice.

It was a bit tricky in places!!!

I've measured my ride heights for the first time-and one wheel is out by about 15mm-any issues or leave it for now?

Thanks

Steve

LR say +/- 7mm, but in my experience cycling the suspension between low and high and back to normal can give up to 15mm difference when the sensors are old. So leave it for the moment:)
 
Since changing the air springs I now find that occasionally the access height light flashes whilst standard height light is on for longer than before-sometimes it takes 20-30 secs for the standard height ride to be reached. This only happens now and again-mostly standard height light straight on -suspension has no leaks-not down on one side or anything like that.
Suspension will go to high mode straight away if asked.

Before the bags were changed it could take up to 10 secs for standard height to be reached if it needed.

Any issues-or suspension just settling down?

I'm off towing for a fortnight so will give it a good bash.

Thanks

Steve
 
Back
Top