After market temp sensor/gauge?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

tweedandbriar

Active Member
Posts
258
Location
Somerset
I have a 2001 TD5

I bought one of the sensors below, but I am having second thoughts - its just another potential source of a coolant leak. If you did fit an aftermarket Gauge, how did you wire it up and what sensor did you use?

Thanks!

s-l1600 (3).jpg
 
Last edited:
No link to the item you bought.
You can buy a top hose outlet with an extra hole for an additional sensor.

Thanks added image now - have you fitted one of these on a TD5?

If so I am curious where on the coolant pipes you fitted it (not much room on the TD5)
What size did you use - most videos show a 32mm which I bought but is FAR too small
What aftermarket gauge did you buy?


Thanks everyone!
 
One of these with an extra hole, Gore products I think.
I fitted one of them in line adapters on our Mustang and going to fit one on the 200tdi sometime. Ok in theory you introduce the chance of leaks but there are plenty of joins in the system already. Doubt two more will hurt
 
I drilled and tapped into the elbow near the original sensor and fitted gauges(ECT + EGT) into a universal A pillar pod... maybe seems on the wrong side for you;)

1708693506241.jpeg



1708693572112.jpeg
 
Back
Top