AFM

norseman · Oct 5, 2023

Sorry to ask what may appear to be a stupid question, but can anyone tell me how to remove the wiring plug from the AFM on my 3.5 EFI ?
The thing will 'wiggle' & loosen, but I can't for the life of me figure out how to unplug it .. being plastic (ugh) I don't want to damage it by brute force & ignorance.

All I want to do is check the resistance readings with my multi-meter

Thanks guys.

kermit_rr · Oct 5, 2023

What's AFM can you post a pic?

Mark Piercy · Oct 5, 2023

Another f<king mauvaise idea !!!!

PaulJM · Oct 5, 2023

If I remember correctly there is a wire spring that need lifting up to release plug

kermit_rr · Oct 5, 2023

Plugs with springs in usually need it pressing, or you can lift it and risk it going into orbit

marjon · Oct 5, 2023

Does it look like this?

P38A - P38 Oil switch connector clip

Hi Guys, Can anyone help? I was changing the front cover gasket on V8 4.0 Thor. When disconnecting the pig tail from the oil pressure switch I managed to ping the little metal 'clip' securing the connector across the drive never to be found again. I have searched high and low on the internet...

www.landyzone.co.uk

J

Ratae · Oct 6, 2023

There's a bigger version of that spring that holds it on.
Scroll down on this link to the testing device & there's one on the right of the pic. Blow it up - might be difficult on a mobile but no problem on a laptop - & you can see the clip as the silver wire across the top of it.

http://www.wedgeneering.co.uk/images/Inj%20tester%20Mk2.jpg

norseman · Oct 7, 2023

Many thanks for all the replies guys, only just read them as broadband has been down (again)
Will try the suggestion(s) & post a picture this weekend Kermit.

AFM

norseman

Well-Known Member

kermit_rr

Very

Mark Piercy

Well fumbled member....

PaulJM

Active Member

kermit_rr

Very

marjon

Well-Known Member

P38A - P38 Oil switch connector clip

Ratae

Well-Known Member

norseman

Well-Known Member

Similar threads