Advice please

davcud · Nov 6, 2017

Fitted new ride height sensors on my disco but have noticed that the drivers side rear (pic 1 ) is a lot higher than pass side rear (pic 2) any suggestions before I rip them out and out springs on
Thanks

neilly · Nov 6, 2017

did you put them on the right way around?

Have you got a nanocom or hawkeye?

Did you disconnect the battery when fitting the sensors?

Cheers

meego · Nov 6, 2017

Why would you fit springs? Fix what's there

brian47 · Nov 6, 2017

What was the reason that the ride height sensors were changed?
As @neilly has asked, was the battery disconnected before the work to replace was started?
Has any attempt been made to recalibrate the rear suspension now that you have the new ride height sensors?

davcud · Nov 6, 2017

Reason for replace previous owner held last ones on with cable ties,I did disconnect the battery,And today I took them off and refitted them again still same ,@meego It has air bags on it

brian47 · Nov 6, 2017

So, we're back to another of @neilly's questions, do you have access to a Nanocom or Hawkeye?

davcud · Nov 6, 2017

Nope I don't

300bhp/ton · Nov 6, 2017

Sounds like it needs calibrating.

neilly · Nov 6, 2017

brian47 said:
So, we're back to another of @neilly's questions, do you have access to a Nanocom or Hawkeye?

Hi @brian47

As he is not answering my questions.....LOL. ..I must be on his ignore list....

Perhaps you can ask him if he knows anyone who does have one...................

Cheers

brian47 · Nov 6, 2017

davcud said:
Nope I don't

As far as I know, sadly the only way to alter the settings in the SLABS ECU is with a known compatible diagnostics code reader.
You say that you don't have access to one, but do you know anybody who has one and could come to your aid? Maybe a member here will read this and pop up with some help.
If there's nobody in your locality, then it could mean having to leave a spare arm and a leg at the nearest Land Rover specialist.

davcud · Nov 6, 2017

I'm going to flash my eyelashes and ask kindly on here if someone has one that can help me out

brian47 · Nov 6, 2017

davcud said:
I'm going to flash my eyelashes and ask kindly on here if someone has one that can help me out

@darrenm is about 20kms from Bolton. I would suggest that you PM him and ask if he can help you out. Be prepared to cover at least his travel costs of course.

darrenm · Nov 7, 2017

I have sent you a pm

Advice please

davcud

Well-Known Member

Attachments

neilly

Well-Known Member

meego

Well-Known Member

brian47

Well-Known Member

davcud

Well-Known Member

brian47

Well-Known Member

davcud

Well-Known Member

300bhp/ton

Well-Known Member

neilly

Well-Known Member

brian47

Well-Known Member

davcud

Well-Known Member

brian47

Well-Known Member

darrenm

Active Member

Similar threads