Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
Admin please delete
- Thread starter jmccall85
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Don't know but do agree the OP would be a candidate.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
nominations for the 2016 'P38 on coils' thread ?
Jake ingleby
Well-Known Member
- Posts
- 473
- Location
- Cornwall
well that escalated quickly
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Thanks, found this:Look up ECE-R-39
It's an EU regulation which is probably why Wammers is so hot on compliance being a big fan anorl
https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/r039r1e.pdf
Which is I assume what you are meaning. Although interestingly these are regs for "type approval". So if the op was manufacturing a Range Rover and was seeking EU type approval the regs would apply.
But owning an old used vehicle which has been modified and then maybe randomly being pulled over by plod in the UK. These are not UK laws for that purpose. I do not believe you'd be able to cite this regulation in a court room, because a private citizen had fitted larger tyres. That's not how Type Approval regs work.
e.g. it's not illegal to fit wider tyres to a vehicle, even if that size was not used for the vehicles type approval. The speedo thing isn't 100% the same case, but it's a similar sort of thing. The regs within it, are only relevant for seeking type approval.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
yep.
a p38 on coils thread escalating by the end of the 1st page.. it usually takes to about halfway down the second page
cooltide
sheep fancier
- Posts
- 2,570
- Location
- Over the hill
And make my wife redundant?
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
That's all nice an that, but can you provide a reference for the +- 10% thing. It's not that I'm doubting you, but I can't exactly use you as a point of reference. Something official would be nice.
And to be fair to the op, there is a very good chance a p38a is pre 2001 anyhow. So they'd still be fine most likely.
And just to throw something else out there. Not all vehicles on UK roads have to adhere to EU type approval. Unlikely to be the case with a p38a I admit, but a NAS D90 or JDM Discovery most certainly would not be needing to meet EU type approval. Nor would a grey imported Ford F250 from the USA. At most they'd need to pass an IVA/SVA, which if they are on the road legally they would have done. If over a certain age (10 years I think), then they don't need any further approval for UK road use, only to be registered.
- Posts
- 58,170
- Location
- Preston Lancs.
Wider tyres are no problem providing they do not foul. Larger diameter tyres are a problem because they alter the speedo readings and the vehicle then does not comply with it's type approval certificate and is therefore illegal to use on the road.
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Sorry, I just do not believe that is the case. Think we will have to agree to disagree on this one.
- Posts
- 58,170
- Location
- Preston Lancs.
No problem, i am sure you will think of something to say to convince the VOSA people if you get pulled at the roadside, when they decide to have a clamp down.
jmccall85
Member
- Posts
- 13
- Location
- sunny edinburgh
Is he actually still going on ha
Glad a hit the ignore button
As stated on first page thanks for info
Glad a hit the ignore button
As stated on first page thanks for info
- Posts
- 58,170
- Location
- Preston Lancs.
If you want to ruin a P38 by all means do so. But be a good little lad and do it on the off road area, i am sure you will find many like minded planks who will agree with you there. But don't do it in the place they are held in high esteem.
