teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
might just do that as I am always taking the wife's car to fill it up as she hates doing it.
aarrgh wife filled td4 with petrol
- Thread starter studogg2
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i know its easy done got stickers on order.anyway today i tried the priming thing i ran the low pumps half a dozen times the pumps ran for about a minute at a time before cutting off.so i am now thinking of replacing the high pressure pump it seems the most obvious answer now because if i crank the engine with the rail feed slackend off a little the flow increses slightly so i reckon the pumps buggerd.
NoDosh
Active Member
- Posts
- 311
- Location
- Hobbit central - Dorset
Silly question - you've not unplugged the cam sensor while checking everything over have you?
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
Only one problem inputting another inside the fuel flap the freelander 1 does not have one
i will put it on the body work in bright white lol.
freelanderoig
Active Member
- Posts
- 593
- Location
- wolves
the landy was first diesel ive had to to make sure I didn't put petrol in I did this...saved me a few times in first month...and stopped wife to
yep thats the ones fool proof hopefully i think all cars should have these.
freelanderoig
Active Member
- Posts
- 593
- Location
- wolves
99p from ebay far better than hundreds pound on repairs even if I do get bit stick of mates
davidsmith1307
Well-Known Member
- Posts
- 1,333
- Location
- Hull
My local BP has pumps where the writing on the handle is badly faded and, despite the handles being black, they are pumping unleaded.
Many people have been caught.
Many people have been caught.
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
now when I think about this I am more likely to put petrol into my car than me putting diesel in to the wife's I just tried the diesel nozzle and it will not fit into the wife's so she is safe and will get me of the hook and putting petrol in mine I can only blame myself
ok guys heres the update i went to my local breakers today and bought a 2nd hand hp pump the car had only done 45,000 miles so theres a bonus so whilst waiting on my special removal tool i have took top engine mount off removed intake manifold shifted some pipes took blanking plug out ready for the big change over.now tell me is there anything that can go wrong using the tool.
guineafowl21
Well-Known Member
- Posts
- 3,349
- Location
- Inverness
Just used it this weekend to do the seals on my hp pump. Nothing to go wrong as far as I can see - screw in the big ring, then the sprocket holder (22mm) without the central bolt. This part goes in quite far. Next, tighten the central bolt and the taper should release with a 'crack' sound. Now loosen the central bolt so the new pump can fit in. Rave says you need to remove the aux belt but you don't.
englishbullterrier
Active Member
- Posts
- 824
Skinny Mike
Well-Known Member
- Posts
- 2,910
Gripping isn't it. I want to know if he's shot his wife yetWaits with baited breath to see if this fixes it !
do i crack the sprockett nut off before i use the tool.
Mick Guilbert
Well-Known Member
- Posts
- 466
Petrol has a tendency to kill your fuel pump as diesel lubricates it and the petrol won't. Had a colleague do the same and the vehicle progressively got worse until fuel pump packed up totally.
aye the bloke at the scrap yard yesterday reckond common rail diesel comon rail pumps cant handle the pressure as petrols thinner and cuts it way through the seals easier.and right enough it has no pressure surley this new one will do he reckons the injectors should be ok as the seals in the pump will just have split.
englishbullterrier
Active Member
- Posts
- 824
We will see......
