frostythor
Well-Known Member
- Posts
- 620
- Location
- NEW FOREST
During the winter my screen started to crack and delaminate, on the driver side bottom of the screen, I put a bit of glass glue on it to stop it going all the way, anyway with the good weather and just finishing off the door replacement , I book a new screen I suspected it was rust that had pushed the glass out and cracked it , I asked the glass company if the could remove it and give me a few day to repair it, they were not sure it could be done, so drastic measure needed, out came the disc cutter an a way we go, strip it down removed the bonnet a cut out the corner
to show the problem rust
so I chopped it out
welded in new steel
in 2 section iner and outer
and just make sure no problem did the other side to it was not a bad but needed doing
so having completed the repaires had my new screen fitted today,
now at this point my world should be all deep joy, ,, except, I got the dreeded 3 amego's now to do
to show the problem rust
so I chopped it out
welded in new steel
in 2 section iner and outer
and just make sure no problem did the other side to it was not a bad but needed doing
so having completed the repaires had my new screen fitted today,
now at this point my world should be all deep joy, ,, except, I got the dreeded 3 amego's now to do
Last edited: