PukkaPicka
New Member
- Posts
- 3
- Location
- Stoke-on-Trent
Hi, I have a much loved 1998 S Reg 300TDI (no ABS) 90 that keeps having my MOT tester complaining about poor brake performance. Apparently, it only achieves 51% which bearly passes the test. To be honest, I can press hard on the peddle and make the tyres skid so how much more braking power is needed but there you go!???
So, since this issue started occurring over four years ago I have changed:
1. Brake Bias Valve
2. New Rear Calipers
3. New Rear Disks & Pads
4. New Front Disks & Pads ( Pads were Mintex but now Apexi)
5. New Front Stainless Steel Pistons
My mechanic, (who I've drafted in on this issue), agrees there is nothing else that can be done and the vacuum being created is fine for the servo.
So to the questions.
Can I change the servo over to the double ABS style servo to gain more power?
Is there a bigger disk, caliper and pad set out there that I need?
Should I just sack off the MOT tester? ;-)
Looking for genuine help please guys n gals.
So, since this issue started occurring over four years ago I have changed:
1. Brake Bias Valve
2. New Rear Calipers
3. New Rear Disks & Pads
4. New Front Disks & Pads ( Pads were Mintex but now Apexi)
5. New Front Stainless Steel Pistons
My mechanic, (who I've drafted in on this issue), agrees there is nothing else that can be done and the vacuum being created is fine for the servo.
So to the questions.
Can I change the servo over to the double ABS style servo to gain more power?
Is there a bigger disk, caliper and pad set out there that I need?
Should I just sack off the MOT tester? ;-)
Looking for genuine help please guys n gals.