90 300tdi exhaust mounts

SteNova · Nov 10, 2013

can anyone show me some pics of the standard 300tdi exhaust mounts, one of mine has snapped but there are loads of random unused ones and the backbox is force fitted onto one so far its always under pressure

SteNova · Nov 15, 2013

james6546 · Nov 15, 2013

If you haven't had any response, I will post some on Wed if you can wait that long...

In Cornwall until then

zeaphod · Nov 15, 2013

If you google it , you'll see this:
Land Rover Defender 200/300tdi Rear Exhaust Bracket - YRM Metal Solutions
Might be some use?
It is likely similar to the 200tdi system - all the bits shown on the free to download parts manual, page 591 onwards.

Chr1s · Nov 15, 2013

SteNova said:
can anyone show me some pics of the standard 300tdi exhaust mounts, one of mine has snapped but there are loads of random unused ones and the backbox is force fitted onto one so far its always under pressure

Are you certain that you have the correct exhaust? I had mine replaced recently and discovered that Land Rover changed the shape of the tailpipe section at some point towards the end of production of the 300tdi. The numpty who replaced it in the past fitted the older style exhaust and had to force the rubber mounts to fit.

Jonnyb1990 · Nov 15, 2013

Which point of the exhaust, will go outside now if you can describe it accurately enough

SteNova · Nov 16, 2013

well i have no working hangers apart from the backbox!

Jonnyb1990 · Nov 16, 2013

When it gets light tomorrow, I will take snaps of the entire exhaust for you, should be able to see what you need !

SteNova · Nov 20, 2013

Chr1s said:
Are you certain that you have the correct exhaust? I had mine replaced recently and discovered that Land Rover changed the shape of the tailpipe section at some point towards the end of production of the 300tdi. The numpty who replaced it in the past fitted the older style exhaust and had to force the rubber mounts to fit.

That sounds like it,

Problem is fixed now... I've bought a td5 backbox to fit

aaronmorris · Nov 20, 2013

SteNova said:
That sounds like it,

Problem is fixed now... I've bought a td5 backbox to fit

How come you've bought a td5 one? Are they a straight swap?

SteNova · Nov 21, 2013

No idea, I just need the backbox gone so I can fit my rear winch

mark-d · Nov 21, 2013

just do away with it then, its of little use anyway

SteNova · Nov 22, 2013

I'd have no boxes at all then lol

taazzukcb · Nov 22, 2013

I have both the TD5 centre silencer removal pipe and the TD5 rear straight through section to, all bolted up to a 300TDI chassis and downpipe.

Centre section has 2 mounts, but you can only utilise one due to the 300TDI positions and the rear mount worked fine after I turned it around.

Been on quite happily for the past couple months.

However, having just gone soft top, I didn't realise how loud it was being completely straight through!

I'm tempted to put the TD5 standard rear section on with the small silencer.

Just don't wanna loose the extra bit of poke it's given me

! And I do like the sound ... Just cant hear my radio any more and that's with some new speakers!

Fume curtain has however dulled it down a surprising amount!

SteNova · Nov 22, 2013

What a fail! My ebay td5 rear section is off a 110

90 300tdi exhaust mounts

SteNova

Well-Known Member

SteNova

Well-Known Member

james6546

Well-Known Member

zeaphod

Well-Known Member

Chr1s

Well-Known Member

Jonnyb1990

Well-Known Member

SteNova

Well-Known Member

Jonnyb1990

Well-Known Member

SteNova

Well-Known Member

aaronmorris

Head's a shed

SteNova

Well-Known Member

mark-d

Well-Known Member

SteNova

Well-Known Member

taazzukcb

Active Member

SteNova

Well-Known Member

Similar threads