5 bearing diesel

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I doubt it. They stoped making the one I need many years ago. It has a housing cast into the main barrel that the pull to stop cable anchors to.
There was one on flea bay last week for £800 but it was a left hand drive one from titily.
Fair enough, TD5 has electronic shut off, so it won't work.
How about run a cable from the shut off lever on the pump, drill a hole in the bulkhead, and just use a cable off a Series 2a diesel?
 
You know me.

it would have to be routed to the off side drivers leaf springs via a centrifugal steam turbine so it shuts off automatically when the driver gets out :D:D:D
You could train your dog to pull the handle when you are out, and stay in the car to guard it.

Or you could train your wife to do it, but that might be more difficult!
 
Unless you want the original type for show reason's a generic Tractor pull stop from the flea bay would do, probable there is already a hole in the bulkhead you could use to fit it.:)
 
Naturally I did away with a tin dash many moons ago. The Moroccan teal upholstery would clash with a common knob accommodating itself around the cab.

ang on :oops:o_O
 
I'll take a look at my donor 109 sometime this week and see if there's still one on there.

I won't ask a penny more than £799.98
 
Back
Top