300tdi not starting

jamesmartin · Dec 6, 2012

fuel is only sucked up to lift pump then pushed through filter to front banjo on injection pump theres a fault/blockage or empty tank somewhere

bridger · Dec 6, 2012

It started to play up when I nearly ran out of fuel, just made it to fuel station and put fuel in, then day after started to play up

jamesmartin · Dec 6, 2012

youll have a blockage some where then ,id start at sender and work forward might be worth bypassing sedimenter at same time

bridger · Dec 6, 2012

Already bypassed sedimenter but I will check it all again. Thank you for your help I will keep you posted , cheers man

Rims · Dec 6, 2012

bridger said:
Pumps fitted correctly so it engages with camshaft, the pipes on the top of the sender were a bit rusty so I used petro patch to make sure no air was getting in. Worked fine when fitted new fuel lines then wouldn't start the other day

I'd still say its the sender, mine started playing up when I nearly ran it out of fuel too. The pipework was a little rusty aswel and I did the same as you did patching it up. Do you have anyone near you who has a disco that wouldn't mind letting you borrow there sender just to prove that it is or isn't where the problem is. I'm breaking my disco that I had the problem on so I have a nearly new sender if you do need to buy one.

biolandy · Dec 6, 2012

try running from a bottle of diesel in the engine bay -put filter feed in bottle plus return line back in bottle-then loosen injection pump input banjo and prime lift pump by hand (lever)until diesel shows at banjo-tighten banjo and try and start engine on starter,it should run.This will prove if you have a problem between fuel tank and pipework to filter.

300tdi not starting

jamesmartin

Well-Known Member

bridger

New Member

jamesmartin

Well-Known Member

bridger

New Member

Rims

Active Member

biolandy

Well-Known Member

Similar threads