300tdi mystery bracket

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ijmj

ijmj

Member
Posts
29
Mystery bracket in question is near the air filter case, around a hose near the throttle cable
IMG_8830.jpeg


IMG_8831.jpeg


It's zip tied to said hose - now, I bought this post rechassis and have found a number of part-finished jobs, should I bolt this to the underside of the air filter bracket like the holes are telling me to or is it spare? Should I take it out?

Any advice welcomed
 
Oh I love mine, solves all the problems I had with my utility 110. Just fit in the tub lengthways! My £150 ifor williams has the mesh door - mesh is just held on with zip ties (installed by previous owner) and just has holes where the gas strut should be. Can't for the life of me figure out which replacement strut would fit.

Where's your air intake?
 
Hicap phill said:
Here’s my special…love these as work horses . With the back on I can sleep in the rear on green lane trips

View attachment 340819
Click to expand...

Oh I love mine, solves all the problems I had with my utility 110. Just fit in the tub lengthways! My £150 ifor williams has the mesh door - mesh is just held on with zip ties (installed by previous owner) and just has holes where the gas strut should be. Can't for the life of me figure out which replacement strut would fit.

Where's your air intake?
 
ijmj said:
Oh I love mine, solves all the problems I had with my utility 110. Just fit in the tub lengthways! My £150 ifor williams has the mesh door - mesh is just held on with zip ties (installed by previous owner) and just has holes where the gas strut should be. Can't for the life of me figure out which replacement strut would fit.

Where's your air intake?
Click to expand...
Took me ages to find a new cover,came with the solid rear but no strut. Still have the mesh door incase the dogs go inside. When this is fitted I push the mesh right over onto the roof.
My air intake is behind the headlight as it’s not a normal filter.
 
Struts depot on the net has a good section.

The rear tail gate is the same design if it’s mesh or solid. Remove mesh and jut add flat Ali in its place. All fixings are the same.
 
You must log in or register to reply here.

Similar threads

M
Side rail mounting repair
Replies
3
Views
477
dag019
dag019
S
300tdi water in crankcase breather
Replies
4
Views
425
Singr07
S
Lej
200/300tdi air filter mount
Replies
5
Views
774
dag019
dag019
stumpyj
TD5 Fuel line to fuel pump clip
Replies
10
Views
2K
Alan Henry Crossley
A
D
Is My Injection Pump Phucked ?
Replies
12
Views
1K
dogdog1
D
Back
Top