300TDI leak
- Thread starter Onetenv8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wvanzyl
Member
- Posts
- 44
- Location
- Cape Town, South Africa
Yip. Drain oil, remove sump, clean mating surface on sump and block with thinners......to ensure it is free of oil, clean it again. Use Loctite 5699 and follow instructions, I think it is a 2mm bead on the sump mating surface. Fit sump and follow the tightening sequence as specified in the manual.
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
sure its the sump and not the rear crankshaft seal?
