300tdi crankshaft pulley removal need help anyone done this?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gotoneatlast

gotoneatlast

New Member
Posts
3,431
Location
berkshire,uk
Hi there,
got to remove the crankshaft pulley, as part of todays timing belt change,
i dont have the described tool that'll retain it in place, whilst i unbolt,
it has been suggested from past experience with other vehicles that i lay a aocket bar across the chassis rail from the puley nut and crank the engine once to crack it, anyone done this before?
 
Or get sombody to hold a big scroddy through wadeing plug hole in the bell houseing in notch in flywheel (you have to find it first) and use a big breaker bar on crank pulley nut!
 
You can get those kits in the red box for about £15 ish. Puller locking pins etc.

I've done the 300 both with and without the kit, and you spend so long trying to get together a puller, that id advise just shelling out the 15 quid and getting the whole set.
 
I did mine with locktite a scaffold bar, and a friend on the brakes.

I'm sure that's not the best way though!
 
You must log in or register to reply here.

Similar threads

xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
362
xDParis64
xDParis64
Pillar
Disco 3 (LR3) D3 OIL PUMP AND TIMING BELT CHANGE - IT WASN’T WHAT WE EXPECTED.
Replies
0
Views
2K
Pillar
Pillar
C
FL2 Engine Stopped While Driving - Dropped Valve, Engine Swap
9 10 11
Replies
211
Views
19K
CaptainB
C
Tango91
  • Poll
Disco 2 Things I wish I knew when I took the body off (99 D2 TD5)
Replies
8
Views
3K
FlatbedPilot
FlatbedPilot
AH-4x4
M8 bolts crankshaft pulley removal - 200tdi
2
Replies
28
Views
3K
lynall
L
Back
Top