Defender 110 300tdi 110 Land Rover Defender Galvanised and new Bulkhead

Pillar · Dec 28, 2018

Open to offers (or ideas) is my beloved 1998 300tdi 110.

Only considering selling as I am off to Canada for 4+ months next year and will not have the time for it. Mechanically sound except: Likely pinion bearing failure (salisbury axle) happened last week, the day I was collecting the keys from my new house! The misses was unimpressed! Drove it home with shafts and prop off.

Completely rebuilt by me last year on a Richards galvanised chassis.
Puma (2013) bulkhead
Home made wiring loom and dashboard- simple but functional
All brand new suspension components
Front axle rebuilt, brand new flanges, swivels, cvs and half shafts.
Brand new wheel bearings all round
New clutch
Engine and gear box brilliant. Cambelt done 10k ago. 155k miles. MOT'd until Sept 19.

The negatives
Before the next MOT: the exhaust will require new mounts (currently 3inch pipe sat on the chassis, very loud and function but probably won't go through a test!)
Requires windscreen washers- I haven't got around to it yet.

Location near Warminster. (Wiltshire)

Pillar · Dec 28, 2018

bluehaze · Dec 29, 2018

You'll only regret it if you sell it!

Can it not be fixed whilst you're away?

Pillar · Dec 29, 2018

Fixing it isn’t the problem. I can always find time to do that! For the most part this year, it will be sat around doing nothing. And it deserves far more than that!

bluehaze · Dec 29, 2018

Mine just sat still for 8 months. Started first time, now out and about again.

Where you off?

Pillar · Dec 29, 2018

Canada and America, 4+ months in one and then 1 in the other. I’m not concerned with it starting, it will just be sat there doing nothing.

haza88 · Dec 29, 2018

I bet the misses the misses has had words , I’d keep it

1988smithy · Dec 29, 2018

It'll sit there for months yeah, but it'll be waiting for you. All that time and effort to rebuild it, sort the niggles when you get back and enjoy it

Skolmate · Jan 19, 2019

Pillar said:
Open to offers (or ideas) is my beloved 1998 300tdi 110.

Only considering selling as I am off to Canada for 4+ months next year and will not have the time for it. Mechanically sound except: Likely pinion bearing failure (salisbury axle) happened last week, the day I was collecting the keys from my new house! The misses was unimpressed! Drove it home with shafts and prop off.

Completely rebuilt by me last year on a Richards galvanised chassis.
Puma (2013) bulkhead
Home made wiring loom and dashboard- simple but functional
All brand new suspension components
Front axle rebuilt, brand new flanges, swivels, cvs and half shafts.
Brand new wheel bearings all round
New clutch
Engine and gear box brilliant. Cambelt done 10k ago. 155k miles. MOT'd until Sept 19.

The negatives
Before the next MOT: the exhaust will require new mounts (currently 3inch pipe sat on the chassis, very loud and function but probably won't go through a test!)
Requires windscreen washers- I haven't got around to it yet.

Location near Warminster. (Wiltshire)

Have you still got it fella?

Pillar · Jan 19, 2019

Yes mate.

Pillar · Jan 19, 2019

Pillar · Jan 20, 2019

Skolmate said:
Have you still got it fella?

Are you interested?

td5driver · Jan 20, 2019

Hello, I am interested, can you message me how much you are looking for.
Thanks

Pillar · Jan 20, 2019

So I think what I will do is embark on a second rebuild, (we have a spare Cummins lying around).

So anyone want my 300tdi, R380 and transfer box, delivered anywhere in the country. Currently located in South Wiltshire. Make an offer.

kevstar · Jan 20, 2019

Pillar said:
So I think what I will do is embark on a second rebuild, (we have a spare Cummins lying around).

So anyone want my 300tdi, R380 and transfer box, delivered anywhere in the country. Currently located in South Wiltshire. Make an offer.

Im in 2 minds to convert my D1 to a manual or break it...….I have a newly built 300 but I need the injection pump ect as I have
the EDC so how much were you thinking & il have a stew over it

Pillar · Jan 20, 2019

I suspect too much if you just want to rob bits from it! This is a formed unit ready to drop in and go?

Engines alone are going on eBay for £400. This is the lot incl delivery!

Muppetdaze · Jan 20, 2019

Yes but how much are you asking for it?

Pillar · Jan 20, 2019

Well I don’t know what it’s worth. I will probably stick it on the bay and let it find it’s own value.

It also depends on how far away you live if you want it delivered!

kevstar · Jan 20, 2019

Pillar said:
I suspect too much if you just want to rob bits from it! This is a formed unit ready to drop in and go?

Engines alone are going on eBay for £400. This is the lot incl delivery!

Do you want 400 including delivery or do you not know what you want for it ??

Advanced search on begay will tell you exactly what they have sold for, not many bidding over 330 some cheaper
with autoboxes & an auto selling price is around 200 prob not worth it to me.

How much for the cummings

fanatic · Jan 20, 2019

kevstar said:
Do you want 400 including delivery or do you not know what you want for it ??

Advanced search on begay will tell you exactly what they have sold for, not many bidding over 330 some cheaper
with autoboxes & an auto selling price is around 200 prob not worth it to me.

How much for the cummings

Spot the ****ing joker, £400 inc delivery to but **** nowhere’s

Defender 110 300tdi 110 Land Rover Defender Galvanised and new Bulkhead

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Similar threads