3.9v8 wont start nothing beed changed since it ran

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

thetoolman

New Member
Posts
11
Location
halifax
hello everyone I have just gone out to my disco 1 3.9v8 to go to work today and it wont start no work has been done on it and it worked fine last night I have been looking on here I can tell you I think its a fuel issue as no fuel is coming out of the bleed valve last month the same issue was found to be the immobiliser and as such has beeb bypassed any help would be greatly appreciated thanks.
 
Could be the ignition module broken, that's the little black box that's either on the side of the distributor or mounted on an alloy bracket and connected to the distributor by a link lead.
 
think immobilizer problems as I found the pump ok lots of clicking when turn the key on and all ignition spark etc good but no fuel when I was tracing wires I found a cable (green and red) from the fuel pump relay to inerta switch looks a temp fix? all wires been wiggled / connectors pulled apart and put back together by pedals thanks for all advice.
 
You must log in or register to reply here.

Similar threads

N
Dipped Headlight Issue - 2017 Sport Td4 HSE
Replies
8
Views
509
marjon
marjon
loonyspoony
Disco 1 300TDI No Start
2
Replies
29
Views
1K
Stanleysteamer
Stanleysteamer
G
None starting discovery td5
Replies
0
Views
527
gary dhenin
G
moorsman61
Fuel or lack of it
Replies
6
Views
875
moorsman61
moorsman61
B
Making my 1994 200tdi reliable
Replies
18
Views
1K
D1Nut
D1Nut
Back
Top