2023 Defender 90 - towing issues

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

seygardening

New Member
Posts
3
Bought a Defender 90 a few months ago, opted for the detachable tow-ball as multi-height wasn't available from factory at this time. Experiencing excessive noise (clanking) when towing, similar to a metal hammer banging on a blacksmith's anvil! Have towed for over 20 years, never had this issue. Mostly been pick-ups but did have a RR Sport with fixed variable height tow-ball. Dealer is stumped, any advice would be welcomed. I have a feeling that there must be some lateral movement somewhere, could it be between ball & hitch?
 
You bought a noo one thats the issue.

Towing what ?
Have you towed said item with something else with no issue ?

How does the towball attach ?

Option 1 - Its the Trailer

Option 2 - Its the towball not attached right

Option 3- Its the bracket it attaches to not attached right.
 
Bought a Defender 90 a few months ago, opted for the detachable tow-ball as multi-height wasn't available from factory at this time. Experiencing excessive noise (clanking) when towing, similar to a metal hammer banging on a blacksmith's anvil! Have towed for over 20 years, never had this issue. Mostly been pick-ups but did have a RR Sport with fixed variable height tow-ball. Dealer is stumped, any advice would be welcomed. I have a feeling that there must be some lateral movement somewhere, could it be between ball & hitch?
Never driven a new Defender. On old Defenders the towballs used to be quite noisy, because the drop plate was only attached to the frame by a pin, which can't be that tight fit in the holes, because you wouldn't be able to remove it.
Wouldn't be surprised if you have the same issue. Not dangerous, just clunky.

Could well be they all do it, and either no-one else has complained, or the dealer is lying through their teeth.

On the other hand, maybe it is about to fall off, and leave your trailer running down the road on it's own, but I would think that is a bit less likely.
 
Last edited:
Never driven a new Defender. On old Defenders the towballs used to be quite noisy, because the drop plate was only attached to the frame by a pin, which can't be that tight fit in the holes, because you wouldn't be able to remove it.
Wouldn't be surprised if you have the same issue. Not dangerous, just clunky.

Could well be they all do it, and either no-one else has complained, or the dealer is lying through their teeth.

On the other hand, maybe it is about to fall off, and lever your trailer running down the road on it's own, but I would think that is a bit less likely.
I dont think the new ones use the classic drop plate anymore, especially the detatchable...... Agree with everything you said if they do....
shopping


 
I dont think the new ones use the classic drop plate anymore...... Agree with everything you said if they do....
I was using it as an example of a noisy towball.

His post says he has a "detachable towball", which may well use a similar set up, and make a similar noise.

The key point is that both Old and New Defenders are vehicles built to a budget, so don't expect sophistication
 
By detachable do you mean it’s the 2” square bar receiver?

If so they can rattle, you can get anti rattle things that clamp on.
we just got used to it ;).

Oh and welcome:).

J
 
Never driven a new Defender. On old Defenders the towballs used to be quite noisy, because the drop plate was only attached to the frame by a pin, which can't be that tight fit in the holes, because you wouldn't be able to remove it.
Wouldn't be surprised if you have the same issue. Not dangerous, just clunky.

Could well be they all do it, and either no-one else has complained, or the dealer is lying through their teeth.

On the other hand, maybe it is about to fall off, and lever your trailer running down the road on it's own, but I would think that is a bit less likely.
Thanks that sounds like a possibility. Will investigate.
 
You bought a noo one thats the issue.

Towing what ?
Have you towed said item with something else with no issue ?

How does the towball attach ?

Option 1 - Its the Trailer

Option 2 - Its the towball not attached right

Option 3- Its the bracket it attaches to not attached right.
Towing a 3.5t trailer. 1. trailer is ok 2. possibly if the size is too small? 3. garage assures me it's correct
thanks
 
One thing that can result in a lot clunking at the hitch is incorrect loading on the drawbar. [ higher hitch position on tow vehicle is cure with 4 wheeled trailer] Little or no load will result in rattle, more so if the trailer hitch is worn.
It can be difficult to get right for all situations, my trailer loaded is pretty quiet but rattles some when empty.
 
Back
Top