200tdi to v8 efi convertion
- Thread starter rob90v8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
vougese39
Well-Known Member
- Posts
- 1,039
tdi gear box is the wrong ratio and in a 90 you will need the shourt nose bell housing
though saying that i did fit the disco v8 to a 110 i had and left the gear lever where it was and had it very close to the cubby box made for a very quick shift though you could use the remote housing from the tdi bo to make it right
though saying that i did fit the disco v8 to a 110 i had and left the gear lever where it was and had it very close to the cubby box made for a very quick shift though you could use the remote housing from the tdi bo to make it right
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Er me thinks not,
Gearbox is wrong type you could buy a conversion ring £££ or just buy the correct gearbox. As said the transfer box ratio is wrong you will need a 1.00 box opposed to a 1.4 ratio. Cheaper opption is to go for an old 4 speed rangy box much stronger and cheaper but no 5th gear.
v8 and LT95 gearbox,
V8 and defender 200 series long stick LT77 with conversion ring,
V8 and a defender LT77 long stick £££
V8 and santana box ££££££££££££££
V8 and Auto
V8 and an old disco short stick box and forever have a bodged up looking centre console (Cheap)
Beast o Bodmin
Banned
- Posts
- 17,157
i have a 4 speed manual rr v8 box that would suit...
pm me.
pm me.
discopaul
New Member
- Posts
- 571
- Location
- Chesterfield
ive just fitted a 3.5 efi from a RRC with the gear box (LT77) too fit no problems the only thing is the gear lever is in a differant place not that i mind it i think its better
