jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
poor starting starting first go is good sign,some smoke ,pumps wear ,some pumps arent as well tweaked from new
200tdi speed
- Thread starter Jamie90
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
hmmmmmmmmmmm, i must admit in the last few days it has become a poor starter
at first, but i have put that down to the fact that the motor is on its way out, its sounds like the starter motor is not turning it over quick enough then makes a funny grinding noise, but after it first start of the day, its starts happliy all day.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
that does sound like starter grindy noise is pinion jumping out under too slow a speed
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
Yes thought so, it so slow at first then gets quicker and as it starts there is this grinding noise, it must take it about 3 seconds to start now and fires up fine, but last week it would start straight away, if it was worn, it could not become that bad of starter in a matter of a week, must be the starter, butter other wise a good service could be need for, (dont know when filter was last changed) and a tweak of the pump.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
service allways good ,dig out the info on here somewhere it was clearer than i could explain with diagrams for pump
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
This is one of the links what i think is useful. Dividing Creek Imports - Injection Pump Tuning tips from the web
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
looks like it, i cant do links for stuff myself
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Go to page ye want to link to, right click on the address bar at the top of yer screen, click yer right mouse button, click on copy then paste it in yer post on here
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
Ok, thanks very much James, i will keep you updated over the next few weeks and see how it goes.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
Go to page ye want to link to, right click on the address bar at the top of yer screen, click yer right mouse button, click on copy then paste it in yer post on here
Agreed
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
**** it works ,many thanks buster
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
does it work same way with other stuff not in forum like ebay etc or is it more complicated
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
If you do it like that, it should work for all sites, if you want to put a fancy title though, then it becomes more technical.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
cooking tonight, thanks lads
Jamie90
Active Member
- Posts
- 139
- Location
- Nottinghamshire
Yep, you learn something new everyday, cooking gas now, hahaha.
