200tdi Range Rover

stutab · Feb 24, 2015

peter8315 said:
I think i might be able to make an aluminium plate for the top to replace the auto selector, till i can find a proper replacement

You need to find one from a short stick LT77. There is a very good chance that a Disco one will fit especially it it's from the 200 series not the 300 series

peter8315 · Feb 24, 2015

Well i was told that a disco one would fit better than the rr but would not be able to get the arm rest.s down, but rang up avenger 4x4 parts place in peterborugh, he told me that the disco would not fit, so stuffed again

stutab · Feb 24, 2015

peter8315 said:
Well i was told that a disco one would fit better than the rr but would not be able to get the arm rest.s down, but rang up avenger 4x4 parts place in peterborugh, he told me that the disco would not fit, so stuffed again

Cut the centre cubby box off the disco one and fit the Rangy cubby box

peter8315 · Feb 24, 2015

i think thats got to be worth a try

stutab · Mar 3, 2015

Until I get round to doing the work its earning it's keep as the farm shunter

peter8315 · Mar 3, 2015

looks in good nick stu, dare we ask what you stole it for from ebay.

stutab · Mar 3, 2015

peter8315 said:
looks in good nick stu, dare we ask what you stole it for from ebay.

You dare, I paid top money for its condition imo, it cost £1320 plus £35 in fuel to fetch it.

peter8315 · Mar 3, 2015

thats good i paid 4grand for mine

stutab · Mar 3, 2015

I paid £150 for my 1984 Vogue, a tenth of the cost of the 200tdi

Saint.V8 · Mar 4, 2015

How are you finding the engine?

I think it is a delight in our ninety, but how does it fair in a heavy vehicle?

stutab · Mar 4, 2015

Well I can shift the sheep trailer around half full of stuff in high range on tick over. It pulls of with ease and potters around nicely so torque wise it's fantastic, will need to get it on the road to know more

KillaJoules · Mar 9, 2015

Can't get itsolf out of the mud though can it :hysterically_laughi

stutab · Mar 9, 2015

Not when the trailer sinks with a missing front prop and bald road tires no

stutab · Mar 17, 2015

Right, need to get cracking with the work on this. Has anyone got any tips for replacing the rear body cross member? It's about the only thing I didn't change on my V8 rangy. I got one from YRM already

classic kev · Mar 18, 2015

stutab said:
Right, need to get cracking with the work on this. Has anyone got any tips for replacing the rear body cross member? It's about the only thing I didn't change on my V8 rangy. I got one from YRM already

Have a butchers at these. Watch out for the piece of metal just behind the goal post, was a bit of a pain breaking the spot welds and then re-welding. HTH

stutab · Mar 18, 2015

Cheers Kev. I'll have a go soon.

kds · Mar 19, 2015

I tack welded couple of cross braces to the goal posts on last couple I did and found it helps when it comes to refitting the bottom tailgate went straight back on, bit of a pain working round them at times but well worth I thought.

stutab · Mar 22, 2015

Cheers KDS

stutab · Mar 22, 2015

Investigation work this morning [emoji15]

Nothing major and apart from the drivers sill and a patch on the cross member all looks original metal

I wonder if this still works?

KillaJoules · Mar 22, 2015

What's the tank?

200tdi Range Rover

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Dyed-in-the-wool 100% RR Junkie

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Similar threads