200tdi death rattle

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The hard part will be finding another engine in good condition. As Turboman says you should really do some work on it before fitting. I would never buy a replacement engine that I hadnt heard running. I would go for option 3

Col
 
lynall said:
Well if it's making a serious noise it is probably dead
Get another lump if you cant rebuild your own
Click to expand...
Oh its certainly dead. If I could get another 200tdi I would and as others have said, fettle it before fitting. It is finding one that is not as knackered as the one I have!!
 
I think main problem with the 200 is they are so tough they still start and run okay when worn out.
My oldest one breaths like a steam train when hot, but starts on the button and pulls okay.
I have heat seized a 200 before, and it still ran after, that is how tough they are.
 
My Old Landy said:
I know but I have one already :) I would like something that gets slightly more than 17mpg.....
Click to expand...

Yeah but it would in a light 90 with LPG conversion:D.

I know I am a bad influence:p.

I am sure rebuilding an engine is well within your scope of ability, do you do it to your lump or another? Sump off and have a look would probably show the answer to that.

There are short engines on the bay for not much you have all the bits to make it a full 1:).

J
 
I have been having a bit of a look at Turners and various other sites selling engines.
I have decided that I am going to pull it complete and strip it on the engine stand.
Whilst it is out I will do the bulkhead repairs.
I will inspect it and then decide on how bad it is and which way to go next.

Thanks for all the input, I think I just needed a push to get things going!
 
My Old Landy said:
I have been having a bit of a look at Turners and various other sites selling engines.
I have decided that I am going to pull it complete and strip it on the engine stand.
Whilst it is out I will do the bulkhead repairs.
I will inspect it and then decide on how bad it is and which way to go next.

Thanks for all the input, I think I just needed a push to get things going!
Click to expand...

Good choice, always good to assess what you have first.
I do it everyday in the mornings :oops: sorry wrong fred.

J
 
My Old Landy said:
I have been having a bit of a look at Turners and various other sites selling engines.
I have decided that I am going to pull it complete and strip it on the engine stand.
Whilst it is out I will do the bulkhead repairs.
I will inspect it and then decide on how bad it is and which way to go next.

Thanks for all the input, I think I just needed a push to get things going!
Click to expand...
I've got pretty much every spare available for 200's if you're going down the rebuild route. I've literally just finished stripping the main bits off another 200TDI Disco engine today which means I've got a built up block with pistons, crank, ladder frame and sump (sump will need replacing). The engine seems to be in very good condition and bores look good. Can get pictures tomorrow if you're interested- would be after £175 either collection from Southampton or can pallet up for you to organise collection? As I said, any other bits you need I would have in stock.
 
Southernlandy said:
I've got pretty much every spare available for 200's if you're going down the rebuild route. I've literally just finished stripping the main bits off another 200TDI Disco engine today which means I've got a built up block with pistons, crank, ladder frame and sump (sump will need replacing). The engine seems to be in very good condition and bores look good. Can get pictures tomorrow if you're interested- would be after £175 either collection from Southampton or can pallet up for you to organise collection? As I said, any other bits you need I would have in stock.
Click to expand...
That sounds very interesting to me, it would have to be on a pallet as I am in north Lincs. If you put up a few pics, I can get a quote for shipment. Cheers!
 
You must log in or register to reply here.

Similar threads

nesponge
200tdi temperature gauge issue
Replies
1
Views
288
miktdish
miktdish
R
1987 90 NA to 200tdi
Replies
11
Views
1K
dag019
dag019
M
1992 200tdi 90 2.5 Body Parts Catalogue
Replies
5
Views
481
Mepps
M
T
200tdi Defender 90 to auto
Replies
11
Views
1K
kevstar
kevstar
Ian Whitewick
Defender 200tdi refresh
Replies
1
Views
429
steve2286w
steve2286w
Back
Top