2004 Disco II - Needs Engine Rebuild - I could use some help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GRP

GRP

Member
Posts
10
Location
Watford
IMG_2067.JPG

Sadly an oil pump bolt failure means she needs an engine rebuild. She still starts but the big ends have gone. I replaced the Turbo and had the shells replaced. Seemed ok for a bit but after 20 miles the shells let go again. I think a Crank machining will do the trick. That's not a job I could take on so I wonder if any members might be interested in giving her a new home and new lease of life?
Lovely clean car .... Full cream leather, Heated Seats, Almost new Pirelli Tyres, Twin Electric Sunroofs, New XYZ switch on Gearbox, Brand new Turbo. Top Spec and the newest version of the Disco II, 118,000 miles.
 
Last edited:
Hi GRP,

Unfortunately , you may well be a falling foul of the forum rules. Min is 50 posts to sell anything.

Did you take the sump off to check if the oil pump bolt had come undone?

Cheers
 
Shame as I thought the group would have some interested parties. Oh well I'll have to rely on eBay. Yes the bolt was the issue. Repaired the thread, fitted new turbo and changed shells. Ran for about 20 miles and the shells went again. Its a good buy for someone that is capable of doing the rebuild. Sadly that's beyond me.
 
GRP said:
Shame as I thought the group would have some interested parties. Oh well I'll have to rely on eBay. Yes the bolt was the issue. Repaired the thread, fitted new turbo and changed shells. Ran for about 20 miles and the shells went again. Its a good buy for someone that is capable of doing the rebuild. Sadly that's beyond me.
Click to expand...

Are you planning on staying around after the disco has gone ?
 
Shame, thats a really nice looking D2, like the colour too!
Having done a full rebuild I can say that its not really economic, unless you plan to keep the vehicle.
Have you thought about just fitting a complete replacement engine?
A few threads on here about that.
Mark
 
I thought about it - they're very rare though if you want any kind of history and mileage confidence. Most are a part engine sitting on the floor in the corner of a breakers warehouse. Looks like this chap is keeping his if he can. Thanks for the advice though MJI and markomate2!
 
Mate I feel for you

Thought as this was an 2004 it wouldn't of happened!

I have 2005 and you've made me want to take the sump off for inspection
 
Discodevon said:
I have 2005 and you've made me want to take the sump off for inspection
Click to expand...

2005, that really must be the last one sold. I bet there was a good deal there to get it out of the door.

Mine is a 53 plate and I checked mine yesterday , following finding out about GRP's engine. Mine was nice and tight.
Follow Discovery2 websites how to.
Points of interest:
Make sure you can remove the cross member, the PO had welded mine in place.
Get it on a lift if possible as it does make life easier, or get some high axle jacks, and make a note of supporting it so that the front axle hangs down, to give access.
A torque wrench with a low setting is also good. 25Nm for the bolts.

Give it a darn good pressure washing before you start , as the dirt gets in everywhere and refitting the sump is awkward especially if you are worried about dirt ingress.


Cheers
 
I'd definitely check. Mine looks like the bolt worked loosed then the thread let go. Easy thing to check.... wish I had!! :(
 
I didnt have to touch my cross member when I removed my engine.
If you buy/hire an engine crane get a 2 tonne one, it has the reach you will need, I just about did mine single handed with a 1 tonne crane but it was a PITA!
You are not that far from me, Im away for the next couple of weeks but when Im back Ill be happy to pop down and give you some pointers.
Mark
 
You must log in or register to reply here.

Similar threads

D
Jaguar XF engine into a gen 2 Disco 4
Replies
8
Views
2K
tyregeezer
tyregeezer
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Al2O3
Oil Pressure in Different Parts of the Engine
Replies
8
Views
1K
Al2O3
Al2O3
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
Andy Burrell
P38A Range Rover SOLD - 2002 Vogue SE in Olso Blue for sale
Replies
9
Views
2K
Andy Burrell
Andy Burrell
Back
Top