L322 2003 4.4 V8 Petrol. Key fob worn out?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
noblerover

noblerover

Member
Posts
31
Location
Coventry
I'm having problems with my keys. Early fob with built in key. Despite replacing the batteries, I constantly get the low key battery warning on the dash. Today one fob stopped working altogether. Do I need new fobs? If so what's the reprogramming procedure - can I do it myself?
 
noblerover said:
I'm having problems with my keys. Early fob with built in key. Despite replacing the batteries, I constantly get the low key battery warning on the dash. Today one fob stopped working altogether. Do I need new fobs? If so what's the reprogramming procedure - can I do it myself?
Click to expand...
I had a similar problem, in the end I bit the bullet and bought a new key from JLR at a cost of £428 OUCH!, that included programming it to the car, I should think so at that price. The spare parts guy was amazed they still had the info to hand being 19 years old at the time.
 
You can buy the upgraded key off the bay for less than 25 quid, get the blank cut at a proper locksmiths.
Swop over the little transponder into the new key follow powerfull uk guide to programe your new key
Job done.

I would post a pic of mine but the forum is still fecked up on posting pics
 
biketeacherdave said:
You can buy the upgraded key off the bay for less than 25 quid, get the blank cut at a proper locksmiths.
Swop over the little transponder into the new key follow powerfull uk guide to programe your new key
Job done.

I would post a pic of mine but the forum is still fecked up on posting pics
Click to expand...
I tried one, I got it cut to the profile of the old key, but the parts wouldn't fit, the little transponder thing was too big. The circuit board was really tight.
So, I bought another one from a different supplier, that was even worse. at this point I had spent about £40, with key cutting etc. After I bought the JLR key
I messed about with one of the keys to make the components fit better, a dremel is very good for this. I eventually got the parts to fit, not brilliant , mind you but it does work
I have 2 keys, which you really have to have.
 
You must log in or register to reply here.

Similar threads

noblerover
L322 2003 4.4 V8 Petrol. Key fob worn out?
Replies
6
Views
894
noblerover
noblerover
Rubberknees
P38 key fob
Replies
14
Views
2K
Rubberknees
Rubberknees
Lej
Discovery 2 1999 key fob replacement + coding
Replies
12
Views
1K
Stanleysteamer
Stanleysteamer
J
Key Fob Help
Replies
8
Views
2K
Windy scotland
W
A
Engine cutting out 2.25 petrol
Replies
3
Views
1K
Tony Monsantoe
Tony Monsantoe
Back
Top