L322 2002 L322 Range Rover Vogue Central locking not working

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek said:
Again, unless your car features "Stop Start" it's not appropriate as the charging control will not be specified for that type of battery and on your year of car it is certainly not suitable for an AGM battery.
Click to expand...
The perceived wisdom on here generally seems to be that you should fit an oversized Korean truck battery and wind the alternator voltage up so the poor thing is flogging away above its designed output. Oil-burners might need this but elegant 4-litre engines are happy with the setup as specified in the manual. Avoid stop-start, AGM and deep discharge batteries - they march to the beat of a different drum. P38s need a Marty-filter or Mk3 fob receiver to prevent the BeCM waking up unnecessarily. Remember all that and you will be fine.
 
P38 Monkey said:
The perceived wisdom on here generally seems to be that you should fit an oversized Korean truck battery and wind the alternator voltage up so the poor thing is flogging away above its designed output. Oil-burners might need this but elegant 4-litre engines are happy with the setup as specified in the manual. Avoid stop-start, AGM and deep discharge batteries - they march to the beat of a different drum. P38s need a Marty-filter or Mk3 fob receiver to prevent the BeCM waking up unnecessarily. Remember all that and you will be fine.
Click to expand...
On an L322?
Marty's filter is for a P38 not the L322 which is very different in the parasitic drain regard.
 
P38 Monkey said:
The perceived wisdom on here generally seems to be that you should fit an oversized Korean truck battery and modify the alternator output to add only 0.9v to match the battery technology that has changed so your new battery isn't destroyed.... Oil-burners need this due to high compression and an underpowered battery from the outset!
Click to expand...
Fixed that for youo_O:rolleyes:
 
P38 Monkey said:
The perceived wisdom on here generally seems to be that you should fit an oversized Korean truck battery and wind the alternator voltage up so the poor thing is flogging away above its designed output. Oil-burners might need this but elegant 4-litre engines are happy with the setup as specified in the manual. Avoid stop-start, AGM and deep discharge batteries - they march to the beat of a different drum. P38s need a Marty-filter or Mk3 fob receiver to prevent the BeCM waking up unnecessarily. Remember all that and you will be fine.
Click to expand...
The V8 with a modern lead calcium battery also needs the regulator upgrade to fully charge the battery:p
 
Datatek said:
The V8 with a modern lead calcium battery also needs the regulator upgrade to fully charge the battery:p
Click to expand...
Point taken. As I don’t do many miles, I top up the battery charge using my CTek charger. Ctek advise regularly using the higher-voltage “refresh” setting. I need to check the procedure for updating the alternator, hopefully can be done in situ?
Interestingly, the Marelli alternator has a “Made in Italy” sticker - in Russian Cyrillic script! JLR procurement in freestyle mode maybe?
 
P38 Monkey said:
Point taken. As I don’t do many miles, I top up the battery charge using my CTek charger. Ctek advise regularly using the higher-voltage “refresh” setting. I need to check the procedure for updating the alternator, hopefully can be done in situ?
Interestingly, the Marelli alternator has a “Made in Italy” sticker - in Russian Cyrillic script! JLR procurement in freestyle mode maybe?
Click to expand...
No idea about crap Italian alternators:rolleyes: You could try Mobiltron, they might do a suitable regulator. It's easier to swap on the bench but even on the diesel it can be done in situe
 
Datatek said:
No idea about crap Italian alternators:rolleyes: You could try Mobiltron, they might do a suitable regulator. It's easier to swap on the bench but even on the diesel it can be done in situe
Click to expand...
Yeah, crap Italian engineering. Back in the 80’s a pal of mine had a Ferrari 512BB. It had a flat 12, 5 litre engine with four triple down draft Weber carbs and went like stink. What rubbish. But why get one of those when you could have a rust-bucket Land Rover…
 
P38 Monkey said:
Yeah, crap Italian engineering. Back in the 80’s a pal of mine had a Ferrari 512BB. It had a flat 12, 5 litre engine with four triple down draft Weber carbs and went like stink. What rubbish. But why get one of those when you could have a rust-bucket Land Rover…
Click to expand...
Italians build interesting cars but they have a certain reputation when it comes to the reliability of the electrics, much like a Land Rover:rolleyes:
 
okay so i have replaced the amplifier, old one XUO000020 with the new one XUO500040, still nothing, i have checked its getting power and the continuity of the aerial in the rear window both are fine,

honestly not sure what else it could be
 
You must log in or register to reply here.

Similar threads

awkwardbob
L322 2003 RR Central locking not unlocking properly
Replies
3
Views
196
Datatek
Datatek
S
Classic 1987 Range Rover Vogue SE auto 3.5L fitted with LPG Park safety
Replies
11
Views
1K
norseman
norseman
J
Discovery 2 central locking not working
Replies
6
Views
2K
Jack02014
J
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
T
Central locking not working on all doors except drivers
Replies
6
Views
910
Stanleysteamer
Stanleysteamer
Back
Top