2001 td4 auto no reverse
- Thread starter peteworcs
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
NoDosh
Active Member
- Posts
- 311
- Location
- Hobbit central - Dorset
When checking the oil, did you undo the wrong bolt? If so it's a gearbox rebuild as you need to reattach the belts used for reverse.
GrumpyGel
Well-Known Member
- Posts
- 26,393
- Location
- Christchurch, New Zealand
Yeh, worth double & tripple checking you removed the right bolts - there's plenty of people who have changed thier tranmission fluid and removed the wrong bolt by mistake.
There's a thread by Hippo with pics of the gearbox and arrows pointing to the right and wrong bolts.
There's a thread by Hippo with pics of the gearbox and arrows pointing to the right and wrong bolts.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
pictures courtesy of ashcroft transmissions:
1st pic (not suprisingly) shows the do not remove bolt which holds the reverse bands in place
2nd pic show the level bung which is a 5mm allen key bolt
http://www.ashcroft-transmissions.co.uk/automatic-gearboxes/jatco-jf506e.html
1st pic (not suprisingly) shows the do not remove bolt which holds the reverse bands in place
2nd pic show the level bung which is a 5mm allen key bolt
http://www.ashcroft-transmissions.co.uk/automatic-gearboxes/jatco-jf506e.html
Attachments
Last edited:
englishbullterrier
Active Member
- Posts
- 824
No the reverse drive went before I checked the oil I'm aware of the trouble caused if the wrong bolt is removed
But saying that I purchased the freelander of eBay and it was described with out any gear issues,
The bolt could have been removed prior to me buying it, as the first time I had to use reverse was the day after when I needed to reverse of the drive.
If the bolt was the problem would it still select reverse and move an inch or so before it locks up?
Also if I select neutral and try and roll it backwards it refuses to budge
But saying that I purchased the freelander of eBay and it was described with out any gear issues,
The bolt could have been removed prior to me buying it, as the first time I had to use reverse was the day after when I needed to reverse of the drive.
If the bolt was the problem would it still select reverse and move an inch or so before it locks up?
Also if I select neutral and try and roll it backwards it refuses to budge
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
if locator bolt has been removed and refitted, youd have no reverse at all, with out the reverse band clamping ,the epicyclic acts as a diff with a wheel spinning rather than a gear train
NoDosh
Active Member
- Posts
- 311
- Location
- Hobbit central - Dorset
Ah, well we didn't know that, what with that being your first post. As a rule, garage diagnostics require, you know, a garage. A physical examination. Prodding.
We haven't had the chance to do that. You have. Guess that makes you the expert
All joking apart, I'll have a rummage and see what I can find on jatcos locking up in gear in the way you describe. No promises mind!
dougjoy
Member
- Posts
- 42
- Location
- Canterbury Kent
Same problem happened to our jatco auto box 1450 plus vat with 2 year warranty at Gravesend automatic gearbox repairers. Happened in May, perfect since.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
the bolt removal issue is quite easily fixed once box is off the engine ,with only fresh sealant needed
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
vaguely recall an issue where the friction coating had slipped of the band and jammed
(not sure if I dreamt this though)
(not sure if I dreamt this though)
- Posts
- 83,282
- Location
- Embasinga stocæ
Landrover Document re Bolt prob is in CFAQ section.
has been for years
has been for years
