tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Sorry I can't help.Oh collector of P38 bits, got a plastic internal cover fer me 3rd brake light and a latch fer me spare wheel cover board?
2001 p38
- Thread starter Broonone
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Be no good for you,the electrickery inside will be all wrong.I could do with that fob I only have one I dont need the key blade
I belive they can be re programed with a Land Rover Test Book, but I may be wrong.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Your wrong.
otherwise the stealers would be doing them instead of getting them from Huff in Germany.One simple think I would try is, sit in the car and try locking and unlocking the car using the lock door latch then tern the ignition key and see what dash says. If it says use fob I would say it could be your door latch micro switches have failed .
The Stealers are very poor anyway when it comes to P38 I went to get some touch up paint for my car. They checked it out from the VIN. It is obsolete they said. But the paint is the same colour as used on some of the L322's I got some off the net no problem.Your wrong.
Broonone
Member
- Posts
- 28
- Location
- Newcastle upon tyne
You will only need the door handle and lock, forget the ignition,just means you will have two keys. I think I have a handle and key in the garage.
Broonone
Member
- Posts
- 28
- Location
- Newcastle upon tyne
Could you let le know if you do have a lock and key please and how much you want for them
Tony
Tony
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Check your private messages, envelope symbol top right of page.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,379
- Location
- Trapped inside my head @ LZ asylum
Normally £25 on the bay. Depends what colour.Oh collector of P38 bits, got a plastic internal cover fer me 3rd brake light?
Further to @DanClarke s post he also did this I believe ( I have it labelled as his) which shows which wire to short to simulate key turns, I have never tried it, But may get it going while you are waiting for the new handle. The garage should be able to do this.
But I also liked the idea of taking the stuff out of the door lock barrel so you could carry a spoon on your keyring as a conversation piece
Finding somebody in your area with a Nanocom who could sort it would only cost your Cake/beer.
J
But I also liked the idea of taking the stuff out of the door lock barrel so you could carry a spoon on your keyring as a conversation piece
Finding somebody in your area with a Nanocom who could sort it would only cost your Cake/beer.
J
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
The handle will be with the garage on Monday.Further to @DanClarke s post he also did this I believe ( I have it labelled as his) which shows which wire to short to simulate key turns, I have never tried it, But may get it going while you are waiting for the new handle. The garage should be able to do this.
But I also liked the idea of taking the stuff out of the door lock barrel so you could carry a spoon on your keyring as a conversation piece
Finding somebody in your area with a Nanocom who could sort it would only cost your Cake/beer.
J
The handle will be with the garage on Monday.
Your boxes of P38 stuff must be slimming down recently
.J
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Still got loads to sort out so my lad doesn't have to.Your boxes of P38 stuff must be slimming down recently
J
Broonone
Member
- Posts
- 28
- Location
- Newcastle upon tyne
Further to @DanClarke s post he also did this I believe ( I have it labelled as his) which shows which wire to short to simulate key turns, I have never tried it, But may get it going while you are waiting for the new handle. The garage should be able to do this.
But I also liked the idea of taking the stuff out of the door lock barrel so you could carry a spoon on your keyring as a conversation piece
Finding somebody in your area with a Nanocom who could sort it would only cost your Cake/beer.
J
Broonone
Member
- Posts
- 28
- Location
- Newcastle upon tyne
Many thanks for your help. Fingers crossed
RangeRoller dt
Well-Sprung Member
- Posts
- 14,379
- Location
- Trapped inside my head @ LZ asylum
FTFYStill got loads to sort out so we have more room for paint.
@Dopey sold his p38 but I reckon he still got another 3 in the shed if you put all bits together
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
You mean SHE has more room for paint for me to use.FTFY
@Dopey sold his p38 but I reckon he still got another 3 in the shed if you put all bits together
RangeRoller dt
Well-Sprung Member
- Posts
- 14,379
- Location
- Trapped inside my head @ LZ asylum
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Similar threads
