2001 p38
- Thread starter YOGIDAVID
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Fuse 35 and 42 both 10 amp engine bay fuse box feed Havac unit, also fuse 8 30 amp in Becm fuse box via relay 7 in Becm. There are no fuses as such dedicated to blend motors.
oldtel48
Member
- Posts
- 47
- Location
- Colchester
What's your problem as it maybe the motors themselves
I have two problems, one is that the air distribution system is stuck on demist outlets and driver and passenger footwell distribution and although I have changed the hevac unit I still cannot operate the distribution positons.
The second problem is that irrespective whatever you set the temperature on the hevac unit for the passenger side hot air comes out of the passenger demist and footwell outlets. The driver side responds to the temperature set on the hevac unit.
I have checked the fuses etc and they are all ok, could it be the motors.
YOGIDAVID
The second problem is that irrespective whatever you set the temperature on the hevac unit for the passenger side hot air comes out of the passenger demist and footwell outlets. The driver side responds to the temperature set on the hevac unit.
I have checked the fuses etc and they are all ok, could it be the motors.
YOGIDAVID
- Posts
- 12,628
- Location
- Sud ouest France !
hi there, welcome! It's time for "dashboard investigation mode"....
oldtel48
Member
- Posts
- 47
- Location
- Colchester
It seems to me that the blend motors are duff. I have the same issue but not keen on replacing them as you have to take the dashboard out
Let me know how you get on
Let me know how you get on
- Posts
- 12,628
- Location
- Sud ouest France !
dont forget these beautiful machines are getting old! It's a love affair. If you love it enough,you'll fix it, it will drain your every fibre until its fixed, then you'll love it even more...much to your better half's despair...
