rogers5018
New Member
- Posts
- 15
- Location
- Southampton
Hi does anyone have torque references for the engine ? Head and bottom end really ? Also the valve clearences ?
200 tdi tech data ??
- Thread starter rogers5018
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pete5570
New Member
- Posts
- 180
- Location
- North East
Valve clearances are 0.2 mm. Head bolts are 68lb/ft for the inner bolts and 43 for the outer according to haynes manual. What bottom end ones do you need?
rogers5018
New Member
- Posts
- 15
- Location
- Southampton
Big end bolts. Cheers for your help so far !
pete5570
New Member
- Posts
- 180
- Location
- North East
Big end bolts are 38lb/ft. According to the manual.
rogers5018
New Member
- Posts
- 15
- Location
- Southampton
Cheers for your help
sypher
Well-Known Member
- Posts
- 1,997
- Location
- Forest of dean
Dont forget the ANGLE torque on the head bolts !!!!!!!!!!!!
you leave them at 68lbsft you'll blow the gasket in mins ..............
.
you leave them at 68lbsft you'll blow the gasket in mins ..............
.
rogers5018
New Member
- Posts
- 15
- Location
- Southampton
Whats the angle torque ? 60,90 ?
