2.5 na injector pump spring set up.

min200 · Oct 31, 2015

Does anyone have a diagram of a 2.5 na diesel injector pump please? Want to make sure I have put the springs back on in the right place because the bugger wont start now after changing the O ring on the throttle shaft.

Huddy84 · Oct 31, 2015

There's some images and bits in here;

https://www.landyzone.co.uk/land-rover/help-tuning-a-2-5na-i-dont-mean-power-tuning.230139/

Worth a read anyway if not.

min200 · Nov 1, 2015

Thanks chap

Blackburn · Nov 2, 2015

this may help

min200 · Nov 3, 2015

Thanks for that

Dean Whittam · Jan 25, 2016

min200 said:
Does anyone have a diagram of a 2.5 na diesel injector pump please? Want to make sure I have put the springs back on in the right place because the bugger wont start now after changing the O ring on the throttle shaft.

Hi are you sure you got the stop rod in the the place it s easy to miss a line it and difficult to tell take the top off and double check it . Your pump may have a stop solenoid but it might well still have the Mechanical stop too .

Flossie · Jan 25, 2016

If it all goes Pete tong on you.....
I've got a pump that ran perfect that I removed off my engine when it bent a rod and I swopped to 200tdi.

min200 · Jan 25, 2016

I did get it sorted in the end and the cause was rather amusing....
I was over tightening the top bolt on the whole arm assembly effectively cutting off the fuel flow!

Flossie I would be interested in buying the pump as a spare, I could strip it and back and down then rebuild it

Drop me a message

2.5 na injector pump spring set up.

min200

Active Member

Huddy84

Well-Known Member

min200

Active Member

Blackburn

Well-Known Member

Attachments

min200

Active Member

Dean Whittam

Member

Flossie

Well-Known Member

min200

Active Member

Similar threads