Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Uric Acid.
1996 RR 4.0 SE hard to stop, pump keeps running
- Thread starter Rover9676
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
That's the Israeli guy who bends spoons for his day job?!
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
LOL
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Spooning what started his problems with all the little ones running round 
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Not hard. Prepare to lose skin on the bulkhead, even popping the expansion tank off and pulling to one side. Flushing all air out the modulator is the bugger.
- Posts
- 12,628
- Location
- Sud ouest France !
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Bleed , bleed and bleed again.
Don’t ask what, you will know when you get there.
Don’t ask what, you will know when you get there.
Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave. Lights go off, pump stops right away. Wheel are still off for another bleed if neccessary tomorrow. When I start vehicle and depress break I see TC and Brake light in display but both goes off immediately as I depress brake. I'm pretty sure I shouldn't see those lights at all not even briefly. Does this mean air is still in system and another Bleed is required following RAVE again?
Thanks,
Last edited:
Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave. Lights go off, pump stops right away. Wheel are still off for another bleed if neccessary tomorrow. When I start vehicle and depress break I see TC and Brake light in display but both goes off immediately as I depress brake. I'm pretty sure I shouldn't see those lights at all not even briefly. Does this mean air is still in system and another Bleed is required following RAVE again?
Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave. Lights go off, pump stops right away. Wheel are still off for another bleed if neccessary tomorrow. When I start vehicle and depress break I see TC and Brake light in display but both goes off immediately as I depress brake. I'm pretty sure I shouldn't see those lights at all not even briefly. Does this mean air is still in system and another Bleed is required following RAVE again?
Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave. Lights go off, pump stops right away. Wheel are still off for another bleed if neccessary tomorrow. When I start vehicle and depress break I see TC and Brake light in display but both goes off immediately as I depress brake. I'm pretty sure I shouldn't see those lights at all not even briefly. Does this mean air is still in system and another Bleed is required following RAVE again?
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
When you start the engine, you should see the TC and Brake light for the lamp test.
Glad to hear from you! Something or someone was trying to hijack the landyzone site over here forwarding all logins to another site location and wouldn't allow me access all day yesterday. Just wanted to make everyone aware. When turn on the ignition the lights come on momentarily as they should and goes off as they should. With the ignition on, when I depress the brake pedal, the lights go off as I continue pressing on the pedal. My guess is there some air stuck inside Modulator or there was air inside the ABS pump and it was pushing air back into the system while I was bleeding air out. Other than Rave Bleeding, any thoughts on getting the remaining air out of the system?
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
The only way is the RAVE procedure. Personally I wouldn't use a power bleeder.
I was unable to access the Landyzone site this morning, just got a message saying "database error try again later"
Are you saying to just repeat the Rave bleeding method again?
That's the message I was getting then Forwarded to another site.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Yes, re-bleed using the RAVE procedure.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I use the power bleeder to flush through when doing the 2 nipples on the modulator near the bulkhead. Flush through about 3 litres before you move onto the usual RAVE procedure for the brakes themselves. When doing it keep topping up the reservoir as it gets low quickly but doesn't show it. There's a partition inside for the clutch for the manual and to stop the fluid slopping around on bumpy ground.
