TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Ok cheers will have a look when i get chance to go back to it.
Thanks for all you help
Thanks for all you help
1995 Discovery 1 wont start. 2.5td 300tdi
- Thread starter TattooMan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Check the bloody timing, it's easy enough to do.
What color is the smoke coming out the back ?
Black is over fueling (but generally only when running)
Blue is burning oil (engine oil not diesel oil)
White is unburnt fuel, I suspect this is what you have.
Now if the cam belt has slipped the timing will be out, it maybe out just enough to stop it starting due to lack of compression or fuel being injected at the wrong time.
There's been quite a few threads on here about 300tdi's not starting, and quite a few of them have been down to timing.
It's very unlikely that you have lost compression in all cylinders overnight, and if one or two had low compression it would still fire or try to.
What color is the smoke coming out the back ?
Black is over fueling (but generally only when running)
Blue is burning oil (engine oil not diesel oil)
White is unburnt fuel, I suspect this is what you have.
Now if the cam belt has slipped the timing will be out, it maybe out just enough to stop it starting due to lack of compression or fuel being injected at the wrong time.
There's been quite a few threads on here about 300tdi's not starting, and quite a few of them have been down to timing.
It's very unlikely that you have lost compression in all cylinders overnight, and if one or two had low compression it would still fire or try to.
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Like a white to grey colour.
Ive never done anything to do with timing before so its a bit scary haha ill see what i can do. Arranged for a local mechanic to come and do a compression test when hes next free if it comes to that
Ive never done anything to do with timing before so its a bit scary haha ill see what i can do. Arranged for a local mechanic to come and do a compression test when hes next free if it comes to that
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Checked under the rocker cover and everything is fine.
Im gonna have a go at the timing on Mon when im off so any tips and advice would be gratefully recieved.
I dont have the timing tools so are they a neccessity or can i make do without. They look like pins from what ive been looking at so maybe drill bits or scribers etc instead????
Im gonna have a go at the timing on Mon when im off so any tips and advice would be gratefully recieved.
I dont have the timing tools so are they a neccessity or can i make do without. They look like pins from what ive been looking at so maybe drill bits or scribers etc instead????
A drill bit will do the pump (can't remember the exact size), it's the flywheel pin that's not so straight forward.
But if you buy a set of wadding plugs and drill a hole through the center for a small drill bit it can be done quite easily.
On the other hand you could just buy these and save a lot off faffing about.
http://www.ebay.co.uk/itm/LAND-ROVE...s-by-BERGEN-/262030161392?hash=item3d0236f5f0
But if you buy a set of wadding plugs and drill a hole through the center for a small drill bit it can be done quite easily.
On the other hand you could just buy these and save a lot off faffing about.
http://www.ebay.co.uk/itm/LAND-ROVE...s-by-BERGEN-/262030161392?hash=item3d0236f5f0
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
9.5 mm for pump
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Will do cheers. Neeed any gaskets? Or will old ones be ok?
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
No compression on cylinders 2 and 3 so heads coming off
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Gaskets gone near 2 and 3
shoes4pigeons
Active Member
- Posts
- 144
- Location
- Manchester
that's sort of good news!
keep us updated, it was only this morning I was thinking about this
keep us updated, it was only this morning I was thinking about this
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Taking the head to be skimmed today the gasket set should arrive tomorrow then ill let you all know if it starts when its done fingers crossed. MOT is out tomorrow
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Its all back together and now has compression but still WONT START. I give up. I think im going to break it and salvage what i can
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Yes but not as strong as it was before the gasket change??
TattooMan
Member
- Posts
- 37
- Location
- East Midlands
Its running took a while but cranked with easy start smoked badly for about half hour but now clear and starts again
