alexcarter
Member
- Posts
- 76
- Location
- Portsmouth, Hampshire
Roof rails for a 3 door seem quite rare and expensive, or am I looking in the wrong places?
17 year old with a TD4!
- Thread starter alexcarter
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Roof rails for a 3 door seem quite rare and expensive, or am I looking in the wrong places?
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
What? I saw at least 4 sets on local "auto used" about 80 pounds for it
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Local in Poland, various condition but complete (bolts ect.)
weight about 10-12 kgs.
weight about 10-12 kgs.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
I remember back when I was 17. My first car was an L series hippo then soon after a td4 sport.
Not a fan of the hard top versions though
Either way, wicked cars. You will get a lot of stick on here from the tratter boys - just ignore them ! Lol
One of the best mods you can do to your td4 would be to fit an EGR bypass valve and fit a synergy 2 with updated Maf sensor.
Have a search if your not sure what I'm talking about lol
Good luck
Not a fan of the hard top versions though
Either way, wicked cars. You will get a lot of stick on here from the tratter boys - just ignore them ! Lol
One of the best mods you can do to your td4 would be to fit an EGR bypass valve and fit a synergy 2 with updated Maf sensor.
Have a search if your not sure what I'm talking about lol
Good luck
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
Probably more importantly would be the BMW upgraded crank case breather
alexcarter
Member
- Posts
- 76
- Location
- Portsmouth, Hampshire
What's the best EGR delete kit?
JC600
Well-Known Member
- Posts
- 1,103
Pull the vacuum pipe off the EGR valve, plug the pipe with a screw.......job done, EGR disabled and doesn't cost a penny.
alexcarter
Member
- Posts
- 76
- Location
- Portsmouth, Hampshire
Are you saying just remove that pipe and plug it? Haha I like your style
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Best to remove the EGR completely
You can get a proper bypass valve from eBay for around £30
Plus forgot to mention the upgraded crankcase breather if yours hasn't already had it fitted
You can get a proper bypass valve from eBay for around £30
Plus forgot to mention the upgraded crankcase breather if yours hasn't already had it fitted
alexcarter
Member
- Posts
- 76
- Location
- Portsmouth, Hampshire
So the list of things to do/look at.
1. BMW crankcase breather
2. EGR bypass
3. tuning-diesels.com synergy 2
Anything else worth noting chaps?
1. BMW crankcase breather
2. EGR bypass
3. tuning-diesels.com synergy 2
Anything else worth noting chaps?
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
JC600
Well-Known Member
- Posts
- 1,103
Yep, no need for a bypass kit.......make sure you remove, clean and refit the intake manifold, and EGR valve.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Yep, no need for a bypass kit.......make sure you remove, clean and refit the intake manifold, and EGR valve.
Cheap skates way
Similar threads
