109 safari second row seat support

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
John breen

John breen

Member
Posts
12
Location
Midlands
Hi there ,I was wondering if anybody could assist with advice please ,I am trying to source a replacement centre seat support ( the one that sits under the floor ) in a series 2a 109 safari as mine is so so rotten but all the suppliers I have rang have informed me they either don't stock or its discontinued .any advise please.
Cheers john
 
Hi there flossie I did suggest that to a supplier and was told that they were total different , is it a doable substitute ?
Cheers for your help
 
Sorry, I've no idea. It's just a thought being as LR liked to save money, for example I think the side frames are the same as 110 bar the odd thing so thinking maybe that cross member might be similar.
 
Cheers ciderman for your help on this ,thankfully I've managed to get a new one so hopefully that will be going on this week ,one step further towards the mot
 
YRM do them don't they?

http://www.yrm-metal-solutions.co.u...egories/Series_Parts/LWB_Series_2__3/Rear_Tub

YRM061_2.jpg
 
That's not the bit tis a floor stiffener.
The bit the OP wants bolts to the chassis and carries the 2nd row seat loads.
 
Flossie said:
That's not the bit tis a floor stiffener.
The bit the OP wants bolts to the chassis and carries the 2nd row seat loads.
Click to expand...
Oh OK - not sure what they could be then. My second row seats sit on the floor but have their front parts on the step. So not the floor where the second row passengers have their feet (which is a different all in one piece) - the third row or sideways facing seats sit on the wheel arches (but that's also part of the same rear tub construction)...
 
If you look underneath, inline roughly (from memory) with the outer triangular infill panels (behind the 2nd row doors) you will see an upside down channel/box section type fabrication atop the chassis. I think(again from memory) that the lower mountings of your 2nd row seats bolt to brackets which in turn bolt to this channel that is in question.
 
Hmm OK - I've been looking through the parts book and the best I can come up with is the same floor stiffening plate

Part 330265 =>

http://www.lrseries.com/shop/product/listing/8278/MUC8949-REAR-BODY-FLOOR-CROSSMEMBER.html

(cheaper than YRM)

May be the bit that is bust is part of 333560 - whole effing floor section with step

I'll look at mine tomorrow and if necessary make some pictures.

(Station wagon tub is different from "normal" 109 and 88...)
 
You must log in or register to reply here.

Similar threads

Bezdonian
Series 2, 2a, 3 109 second row bench seat
Replies
0
Views
1K
Bezdonian
Bezdonian
L
SOLD - Land Rover Ninety (Defender 90) 300TDi Auto soft-top
Replies
9
Views
4K
mondifa
M
R
What can I use to fill my 110 Station Wagon 2nd row footwell?
Replies
6
Views
1K
Grebby
G
H
Second Row Seat Dimensions
Replies
2
Views
771
Huffi
H
B
Freelander to Commercial conversion
Replies
8
Views
12K
bushwwacker
bushwwacker
Back
Top