7pillarsbucks
Member
- Posts
- 21
- Location
- Buckinghamshire
Hi all, I’ve just been quoted £200 for a pair of track rods for my Freelander Auto 2005. Doing a quick online search that seems way over the mark - am I right?
£200 track rods?
- Thread starter 7pillarsbucks
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
7pillarsbucks
Member
- Posts
- 21
- Location
- Buckinghamshire
Right just to add, they said I need inner track rods and ends(?).
biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
Yeah
Alteredtech
Well-Known Member
- Posts
- 483
- Location
- France
Hi,
With the labor or only for the parts ?
Regards
With the labor or only for the parts ?
Regards
A FL1 doesn't have inner track rod ends. It has long track rods with bushes in keeping them located. They seldom fail, but I guess it's possible.
If the £200 is a fitted price for a pair of complete track rod assemblies, then it's acceptable. A complete track rod assembly is about £70 per side from my go to LR parts supplier.
7pillarsbucks
Member
- Posts
- 21
- Location
- Buckinghamshire
Parts only…
7pillarsbucks
Member
- Posts
- 21
- Location
- Buckinghamshire
Ok thanks - cost was 190 for parts only… Though am now confused about them talking about inner track rods. Think I’ll take it to a LR / 4x4 place (took it to local garage).A FL1 doesn't have inner track rod ends. It has long track rods with bushes in keeping them located. They seldom fail, but I guess it's possible.
If the £200 is a fitted price for a pair of complete track rod assemblies, then it's acceptable. A complete track rod assembly is about £70 per side from my go to LR parts supplier.
7pillarsbucks
Member
- Posts
- 21
- Location
- Buckinghamshire
Completely missed the linkA FL1 doesn't have inner track rod ends. It has long track rods with bushes in keeping them located. They seldom fail, but I guess it's possible.
If the £200 is a fitted price for a pair of complete track rod assemblies, then it's acceptable. A complete track rod assembly is about £70 per side from my go to LR parts supplier.
. Am gonna buy RH LH assemblies - my mate has garage space and we’re going to replace them ourselves 
.
Last edited:
That's what I linked to from Advanced Factors, but being OE are more expensive than the ones you linked.Completely missed the link
EeEk
Well-Known Member
- Posts
- 681
- Location
- Elgin, Scotland
they will corroded together never to come apart again.............i suppose the choice is 2 track rods + 2 trackrod ends + 1x labour vs 2 trackrod ends + 2x labour
Anaconda
Well-Known Member
- Posts
- 3,556
- Location
- Thames Valley
Tie rods are the inner part, track rod ends are the outer part.
Don't forget the wheel alignment after you have done the work.
Don't forget the wheel alignment after you have done the work.
- Posts
- 3,878
- Location
- Near Heathrow.
