Search results

hi, I have a 01 plate td5 auto with 150000 on the clock. about 4 weeks ago it wastaking a good 10 seconds or so turning the starter to fire it up. this was in the mornings when cold, started up ok when engine was warm.later in the day. or though there were acouple of occasions in the afternoon...

sorry to be abrupt but its a long story

Hi all, going to change my disco from air bags to springs on Saturday, I believe the computer needs reseting after doing this. would it be ok to drive it locally for a couple of days until I can get this done, thanks, alan morgan.

seems ok now I started it up and shut the door and bounced up and down on the rear of the side steps I'm 16 stone and it seems fine

either that or it pumped itselve up as i drove about 30 yards to my drive without me noticing

hi, I have an 01 plate disco 2 with air bags ,1 week ago hooked up to our horse trailor in our field my wife said the rear left suspension looked very low I thought it was because it was on a bit of a slope .yesterday my wife was at a horse show hooked up to the horse trailor the rear...

Hi. i have a 01 plate td5 with 150000 on the clock.probably not linked but noticed yesterday a squeak from the offside front wheel seems to be the brake pads not returning properly on stopping front nearside disc warm front offside very hot.thought i would mention it. driving back from norwich...

hi i have a 51 plate td5 with 140000 on the clock. the front prop shaft has 3 universal joints one of the rear 2 was nackered . i contacted my local independent land rover garage and tried to order the part. they said you can only get the front one as it doent show a part number for the rear 2...

hi thanks for that forgot to mention also started at about the same time as the nock when i put it in reverse and when putting it back to drive there is a crunching noise it only makes the crunch when going from reverse to drive no other gear change ie from park to drive. any thanks alan.

hi, i have an 01 td5 auto with 140000 on the clock. noticed today a nocking noise when pulling away from a standstill i think from the rear. seems to be louder the faster you pull away. doesnt seem to do it if you slow down to about 5 mph and then accelerate any ideas. many thanks, alan.

hi. i have a 01 plate td5. last year when i changed the fuel filter it was a pig of a job to get the new one to seal. kept leaking. any one got any tips . many thanks.

thanks meego . ill give it a try. alan

hi. i have a 51 plate td5 with 120000 on the clock . i am looking to change the ride height sensors. i contacted my local independent land rover dealer who in the past have been fairly reasonable on cost .to do things my mechanic mate cant do they quoted me £270 to supply and fit both rear...

try switching ign on delay turning to starter for about 2 seconds works with mine

hi i have a 51 plate td5 auto. the heated rear window has stopped working. fuse is ok , my mate who is a mechanic had a quick look at it he has this electric test gismo. he said he was getting a reading of earth from both connections that connect to the heated rear window.and would look at it...

the leaves are getting in through the slots along the bulkhead by the base of the screen ,the foam filters that block the slots disintergrate with age . i had the same problem threw away the foam filters and covered the slots with some very fine mesh.

hi .i have a 51 plate td5. heated rear window not working . fuse ok. the wireing into tailgate does not seem damaged. i cant seem to find which relay covers this to check that out .anyone know which one it is as its not shown as a relay specific for the heated rear window. many thanks

an ifor williams horse trailor with two large horses in it .

hi all. i have to replace the large radiator hose on my 2001 td5 auto. the one with the bleed screw on the top.any one had any problems buying the cheaper pattern ones or should i stick to a original iand rover part. many thanks.

i have a 2001 td5 a couple of years ago my heater fan was making a hell of a noise . it turned out that the foam filters that run along the top of the engine bay bulkhead deteriate with age and fall out and some small twigs and leaves had got in the heater fan causing the noise i replaced the...