Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    2.5 KV6 (2001) o2 Sensors

    Problem Solved. :D 1 New post cat o2 sensor fitted; reset fault code and hey presto, problem gone away. Never ran so good, more responsive, smoother throttle and better engine breaking. Big thanks again Hippo, cheers. Thats now all mechanical problems solved; now onto some of those more...
  2. S

    2.5 KV6 (2001) o2 Sensors

    Thanks hippo; that confirms I'm not going completely mad:D So i'm going to hazard a guess that when the computery thingy says Bank 1 sensor 2; what it really means is the only o2 sensor behind the Cat. If it was either of the 2 sensors before the Cat it would read Bank1 (or Bank2) Sensor 1...
  3. S

    2.5 KV6 (2001) o2 Sensors

    My exhaust definitly does not resemble the image attached or the Rave cd image?? I have the 2 sensors on the manifolds - then the exhaust travels down and back toward the centre line of the car; where they join together - then Cat - then 1 o2 sensor. If the comp' reads Bank1 Sensor 2, then I'm...
  4. S

    2.5 KV6 (2001) o2 Sensors

    Help:mad: MIL on reading o2 Sensor Bank 1 Sensor 2. However; scoured internet and cannot find an image that looks like my exhaust! It appears that all the manuals tell me I should have 2 Sensors before Cat & 2 Sensors after Cat. This appears untrue, I can locate 2 Senors before Cat and...
  5. S

    Newbie looking for Electrical advice

    I,ve finally figured it out :) after months of on/off looking. Some little S%$t has purposly scrathed the printed circuit board with a screw driver or something, ggrrrr. So, Options, theres a few complete instrument/display spares on e-bay; but none from a 2001 2.5 pertol. Can I take any...
  6. S

    Newbie looking for Electrical advice

    More Probs found:( Took dash apart and had closer look at circuit board (Thanks again to Hippo for the vid). On a very very close inspection I found 2 very small purposely placed amounds of Electrical tape placed over the LEDs for Engine Man Light and ABS light :mad: Removed them, put all...
  7. S

    Newbie looking for Electrical advice

    Hippo, you're a Star :) I can confirm I have no Engine Light? However, The last time I took dash apart, I was looking at the wrong part. I thought the engine light was in the 'strip' at the bottom :o I shall double check for a bulb this weekend at the bottom of the Rev counter, as per...
  8. S

    Newbie looking for Electrical advice

    Its a 2003 (Y Plate) 2.5 ES. If I look closely I can see the 'Image' on the Dash? When I first investigated, took the dash apart, it does not appear to have any good old fashioned removable lamps, just a series of 'pre-soldered LEDs'? I'll take apart again this weekend and have another look...
  9. S

    Newbie looking for Electrical advice

    Hi all, New Freelander owner (& loving every bit of it, including its issues). Seeking advice on where to start looking for the following problem; No 'Engine Management' Light on dashboard when turning on ignition! I've taken the console out, cleaned everything i could (noticed it doesn't...
Back
Top