Search results

Oh so no td5 engine workshop manual supplement?

Thanks but can’t see a td5 workshop manual on there only an owners manual

can anyone help out with a pdf link for a 2005 Td5 defender, every forum post and link I can find seems to be dead. I have found a German version but I dont fancy my chances at translating.

Quick question. Do valve caps just sit on top the valve stem and get held in place by tappets or should they be a tight push fit?

No I 1st noticed this just after an oil change before being driven. Had thought it had gone away but not the case. It’s been suggested the sump pipe may be slightly blocked or that I have too much oil if my dipstick housing has moved

Yes it’s at n

That was my 1st thought but nope it was spot on. Although dropping now

I don’t think they can be connected wrong. Problem didn’t exist before as far as I’m aware. All happened after using a different grade oil, oil and air filter change and replacing turbo to air box hose

So good compression, turbo seems good no worn bearings or anything yet it seems the turbo is drawing through the breather instead of the air box when filter is installed. I did change the air filter to turbo hose as mine was a bit knackered. It wasn’t sucking flat but had seen better days. This...

It’s just that it wasn’t doing it. I changed oil and filters then pretty much found the problem a week later

The only significant change I can think of is I’m running 10w40 oil instead of 15w40

Nothing significant

I did a compression check through the glow plug fittings readings from front to back 460, 470, 460, 480

I don’t know how to do that so no

A couple weeks ago once I was sure this issue was cured. It seems having the air filter fitted causes it

It’s a new air filter. But without one fitted there is no issue. How do you diagnose crankcase compression?

That that photo was to show the amount that is coming out. It won’t let me add another pic now!

I’m just getting my car ready for mot and noticed whilst it was idling that oil was running out of the beak grommet on the underside of my air filter box. Any ideas on the cause? The turbo side is clear and that’s good. I've replaced the cyclone breather and it didnt help, put breather pipe...

Was hoping it was a leaking heating system which would explain the overheating

replaced the water pump today - no issue found found water under the rubber in the footwells both sides. could be a coincidence as went through some flood water the day before but that was 3 weeks ago now. im hoping the heating system is the cause