Search results

I just need to find some green lanes to try it out but don’t know any around Cheshire…. Feel free to pm any that people know feeling like cowm quarry might be a little rough for the new one just yet

That’s exactly what it’s failed mot on!

Ok nope it faulted out when old unit was plugged back in “great” …. Anyhow problem solved —- sold the car! So now I have a 2007 sport 4.2 supercharged, yes glutten for punishment I know.

Yep the heights definitely seem off I’m kinda hoping if I plug the old one back in the eas won’t jump back into lockout and the ride heights will revert to normal?? What are the chances do you think?

Right then!!!! Received replacement eas ecu, plugged it in, connected laptop and as soon as I fired up the eas unlock program the vehicle cleared faults and proceeded to raise, this is before even pressing initialise, however when initialising program still get pp in the comms and tbh the...

Ok cleaned the earth still no joy,, I have a question being as I’ve just ordered another 2nd hand eas ecu before my airbag let go the air suspension was in full working order would the suspension be in full working order if the eas ecu was dead?

Thanks for the pic I can see something that looks like this on the passenger side inner wing so I will clean that up tomorrow. The eas relay already activates.

Oh and checked all fuses they’re good

Ok…. I have bridged serial comms received and serial comms transmit straight from odb2 to very near eas ecu to rule out wire breaks in those 2 . I don’t know how to check whether 12 volts are going from relay to ecu. And where does c117/8 (the black wire from pin 18) actually earth on the...

Ok ran T4 also found a couple of broken wires in passenger side under carpet but still no joy see attached images.

I’m hoping to go see a guy this weekend who has a T4 diagnostics machine…. He said it “May” enter the eas in a slightly different way to the RSW program? Anyone know if this sounds plausible????

Ok definitely does the beeps and definitely hear the relay clicking on and off every time I initialise

I will run through the process again hopefully tomorrow night and post my comparison (obviously I don’t get good idle just red) and PP in the RX

I do get the 35 slow and beeps yes it’s a tall black one the pic of it is about 12 posts up.

Mine clicks when you initialise program and then a sec or 2 later clicks again. Bare in mind the car was totally fine until the catastrophic air leak! I’m not keen on buying a 2nd hand relay when mine appears to be ok and for all I know the 2nd hand one could be buggered. I am definitely at a...

I can definitely hear something clicking under passenger seat obvs got to be the relay still getting pp in the rx also what or where is the baud rate if you mean the sliders for idle delay they only go from 0-500

Ok guys new odb plug fitted and still exactly the same!

Going too wire this in later in the week and if that doesn’t work I’m completely stumped.

Picture in previous post of eas relay

Just finished doing all the wires on drivers side too still no further progress!