Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    P38A Having even more problems now

    Hi I think that's a good idea, not sure where to locate everything but at least I will be doing something, I will also look under fuse panel inside the main fuse box. These fuses aren't connected to my lights problem which is what I really need solving because its MOT time after today. Didn't...
  2. C

    P38A Having even more problems now

    Hi I didn't check inside the fusebox, but did remove every fuse looking for any dis-colouring. Fuse 14 1 Rear Central door locking...…I did have problems with drivers rear super locking, had to smash the motor to get the door to open, the connection block is now disconnected and I now don't...
  3. C

    P38A Having even more problems now

    Hi Just an update.....inspected the Becm nothing looks wrong, today checked main fuse box, cleaned earthing points, also inspected cleaned both connection blocks under expansion tank again nothing looked dirty or green. Still cant replace fuse 14 or 15 just blows straight away. My next thought...
  4. C

    P38A Having even more problems now

    Hi Got the car going, it was my mistake, but also needed to wiggle the small wire on the solenoid, this is something I have had to do in the past. Regarding my other problems I'm going to change my main fuse box and clean earthing points... nothing to lose, if it doesn't solve my lighting issues...
  5. C

    P38A Having even more problems now

    Hi Just tried that....side lights work except L/H rear one of my initial problems....no dashboard lights, does this confirm no voltage from fuse1. Power supply to fuse 1 2 3 4 comes from the main fuse box through max fuse 1 60amps...
  6. C

    P38A Having even more problems now

    Hi Don't have radio?......took it out to put in another car. When I switch ignition on to position 1 you would get some illumination even before that doesn't the green round light around the ignition come on as the door opens?
  7. C

    P38A Having even more problems now

    Hi It was getting dark so not a lot, I double checked all the plugs and the main cables which if I understand right are different feeds for certain fuses. The job I under took today is something I did a few months ago and had no problems even cured some of my initial errors.....car started then...
  8. C

    P38A Having even more problems now

    Hi This has been long saga...... fuses blowing (14 and 15 sometimes 17) also the following problems 1 L/H Rear Light not working 2 L/H Brake Light not working 3 L /H Reverse light not working 4 R/H front dip light not working 5 Courtesy light staying on 6 Front fog lights stopped working last...
  9. C

    P38A Whats the implication of swapping the Becm.

    Hi Cheers I have sent him a message.
  10. C

    P38A Whats the implication of swapping the Becm.

    Hi Since having a accident of milk going over my BECM, and the result of this is things turning off or not turning on, members opinions is to change my BECM. 1 So do I have to get one with the same code L AMR 6000? 2 Will I have to send both away to someone to change info from my old BECM? 3 Do...
  11. C

    P38A Electrical Rear Lights Gremlins

    Hi I've had constant problems with my rear lights, these constantly change each week, for many weeks fuse 15 constantly failed this has been ok for the last week. I have also had problems with fuse 14. From Sunday the lefthand side isn't working all the bulbs are ok checked these with the...
  12. C

    P38A Im back again, fuses blowing.....help

    Hi Got distracted kept using my P38 without fuses 14 and 15, anyway decided to have a look today, so I thought I would just try to replace fuse 15 to see what happen, last week it just popped straight away. Well today it went in.....and my problem is I have one fog light on and one side rear...
  13. C

    P38A Im back again, fuses blowing.....help

    I will investigate the wiring in the areas you've mentioned......Cheers!
  14. C

    P38A Im back again, fuses blowing.....help

    Hi I'm having problems again, I'm sure related to my previous thread 'Milk in BECM'.....blowing fuses number 14 and 15...rear central locking and towing socket petrol flap. If I try and replace fuses it blows straight away. Do I need to go back inside the BECM again if so what will I be...
  15. C

    milk in my becm

    Hi Reading old threads again, i found one where the author had smashed the motor off, so I went for it and removed the motor and the door is now opens and works on the door button. Will be looking for a pair of rear latches now, which if I have a problem I will create a new post. I would like to...
  16. C

    milk in my becm

    Hi Checked my wires (Pink and Orange) again from the BECM and I'm getting a 12volts pulse so maybe BECM is ok. Took my other side rear card off (passenger rear) to compare what moves and what doesn't. the big difference is the feel and noise of the door latch, which is obvious when we have all...
  17. C

    milk in my becm

    Hi Everyone I've tried the pink and orange wires on a good 12v battery, so now thinking the motor is toast. I do have the door card off so now wanting suggestion on how to release the lock. some have suggested just smashing everything I can see which is very little. is it possible to unscrew the...
  18. C

    milk in my becm

    Hi Thanks for your reply...………..I have been out today and tried what you have suggested but using a 9v battery out my mulimeter, Im going to try a 12v battery just to make before trying the next stage. These are the problems 1 Passenger rear door works on the button and internal lever, but not...
  19. C

    milk in my becm

    Hi Thanks for this information going to try this today, with 9v battery...…...so fingers crossed
  20. C

    milk in my becm

Back
Top